miamo452 Posted January 10, 2014 Report Share Posted January 10, 2014 On my 510 goon the large hose that goes from where the gas cap is to gas tank is broken. It's quite the tough material so I was wondering if it was possible to buy a new one and install it or if I'd be better off just making one? Is there an actual name for this piece? Quote Link to comment
Eagle_Adam Posted January 10, 2014 Report Share Posted January 10, 2014 rubber filler neck - and you probably have to hope ebay has one or make one. but im not a 510 guy so wait for others to chime in Quote Link to comment
MikeRL411 Posted January 11, 2014 Report Share Posted January 11, 2014 Start your search here http://community.ratsun.net/topic/58626-how-to-new-fuel-filler-mod-for-a-510/ and good luck! Quote Link to comment
Draker Posted January 11, 2014 Report Share Posted January 11, 2014 This is for a goon... those other mods won't work. It's a different hose. Maybe modifying that design a bit may work..? But you'd have to find a suitable substitute. I know of a NOS one if you are ready to pay up. Quote Link to comment
Laecaon Posted January 11, 2014 Report Share Posted January 11, 2014 Try heating it with a blow dryer if you need to manipulate it all. You can also make it a tad longer if need be. Quote Link to comment
hang_510 Posted January 11, 2014 Report Share Posted January 11, 2014 broken at the top? if you can find large diameter fuel safe hose (RV store) you can make it work. i used a little RTV too Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.