Machining brand new cannon manifolds

[521eer]

cannon manifold 1.JPG 

 

This is the proper way to insure no leaks...

[Tristin]

You might want to fix your link... or actually post the image.

[Tristin]

Are you trying to post a picture or link us to something?

[Tristin]

Upload your image to a hosting company and copy the [ IMG ] and paste it in the reply box. Or right click on the image and copy the direct URL, then above the reply box there is a green polaroid icon, click it, and paste the URL in the box.

[Datso72]

Is it the short manifold ???

[Mattndew76]

I am waiting to see a picture too! me see me seee!

[521eer]

The manifold comes rough and to thick to bolt down properly. The washers do not sit flat enough to hold both the exhaust and the intake both tight.

So what im doing here is taking it down to just thicker than the header flange about.(050-.100) thicker. but the main issue is resolved because at least it is flat now.

[521eer]

help i keep getting an error message saying im not allowed to use that image extension.

[EricJB]

Yes I agree. Even the 25 yr old ones are pretty raw. I had to mill the flange to match the header, (I think the stock exhaust mani is thicker though) and cut the soft mounts and manifold for 48's. I thought everyone did.

 

/URL]

 

 

 

 

 

[datzenmike]

Maybe we can close this until pictures become available?

[zianian]

:confused:

[decoy12]

http://community.ratsun.net/topic/691-how-to-post-pictures-and-keep-online-photo-albums/

 

:yawn: