metalmonkey47 Posted March 25, 2013 Report Share Posted March 25, 2013 I'm trying to get the bezel off on my 620, and I have all the screws out, but I can't figure out how to get the damn wiper knob off without breaking something :confused: Also can't manage to figure out how to get the damn cigarette lighter out of the front without further cracking the bezel. I got the cigarette lighter tabs in the inside pulled up that look like they're holding it to the dash, but not even a wiggle. Any insight?? Quote Link to comment
laotsu Posted March 25, 2013 Report Share Posted March 25, 2013 tear one apart at the junkyard? Quote Link to comment
sick620 Posted March 25, 2013 Report Share Posted March 25, 2013 cig lighter: reach hand behind and loosen power wire out. then turn the assembly from the back (lefty loosey), if the fronts spinning use a flat head or something to keep it from spinning. The ciggerette lighter is 2 pieces (threaded together) and one half is holding it in from the back. wiper knob: pull it out all the way. Grab the shaft with vice grips or pliars. while pulling that shaft towards you, push knob in, and turn a quarter turn and it falls off.... Quote Link to comment
metalmonkey47 Posted March 25, 2013 Author Report Share Posted March 25, 2013 We don't get 620's at the junkyards here. Never seen one that wasn't on the road in person. Quote Link to comment
metalmonkey47 Posted March 25, 2013 Author Report Share Posted March 25, 2013 cig lighter: reach hand behind and loosen power wire out. then turn the assembly from the back, if the fronts spinning use a flat head or something to keep it from spinning. The ciggerette lighter is 2 pieces and one half is holding it in from the back. wiper knob: pull it out all the way. Grab the shaft with vice grips or pliars. while pulling that shaft towards you, push knob in, and turn a quarter turn and it falls off.... Thanks! I'll go give it a shot! Quote Link to comment
sick620 Posted March 25, 2013 Report Share Posted March 25, 2013 ill make a how too in a few minutes if you want? Quote Link to comment
metalmonkey47 Posted March 25, 2013 Author Report Share Posted March 25, 2013 No biggie, got it Sick!! Took me about 30 seconds after responding to pop it out! Now just fighting the speedo cablie trying to unscrew the damn thing from the back :P PITA Quote Link to comment
laotsu Posted March 25, 2013 Report Share Posted March 25, 2013 We don't get 620's at the junkyards here. Never seen one that wasn't on the road in person. nor round here, just a suggestion. Quote Link to comment
datzenmike Posted March 25, 2013 Report Share Posted March 25, 2013 Pull some speedo slack into the engine bay and then you can pull the gauge cluster towards you more. Hey, get monkeygirl's little fingers up there! Quote Link to comment
Eagle_Adam Posted March 25, 2013 Report Share Posted March 25, 2013 get monkeygirl's little fingers up there! Bad mike....... :P Quote Link to comment
datzenmike Posted March 25, 2013 Report Share Posted March 25, 2013 i'm bad.... Quote Link to comment
metalmonkey47 Posted March 25, 2013 Author Report Share Posted March 25, 2013 Pull some speedo slack into the engine bay and then you can pull the gauge cluster towards you more. Hey, get monkeygirl's little fingers up there! It was just tight :P OH and I don't think Monkeygirl will be much help here, she's back down in FL for a few months again Quote Link to comment
datzenmike Posted March 25, 2013 Report Share Posted March 25, 2013 How will you get by without her? Quote Link to comment
metalmonkey47 Posted March 26, 2013 Author Report Share Posted March 26, 2013 How will you get by without her? My two best buddies, righty and lefty :P Quote Link to comment
datzenmike Posted March 26, 2013 Report Share Posted March 26, 2013 boobs?..... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.