Eric Posted March 11, 2013 Report Share Posted March 11, 2013 Starter on my 260z died so i had to fix that, after unbolting it i found out the top bolt was a wierd piece of bolt, someone tried to make it fit with an angle grinder or something like that. So i wanted to put in a bolt that looked better and fits properly only to find out that the bolt(or the hole it needs to get in to) has a weird size? It looks like it is a 9mm bolt, 125 thread, is that correct? Quote Link to comment
Eagle_Adam Posted March 11, 2013 Report Share Posted March 11, 2013 i have a spare motor i can pull the bolt from but it will take me a week or so, im in the middle of moving Quote Link to comment
Eric Posted March 11, 2013 Author Report Share Posted March 11, 2013 i am in no hurry :) Quote Link to comment
metalmonkey47 Posted March 11, 2013 Report Share Posted March 11, 2013 Starter bolt is a lot larger then that, I think it's an M10x1.25 Quote Link to comment
Eric Posted March 11, 2013 Author Report Share Posted March 11, 2013 the lower one looks like an m10 yes but the top one is m9 for some reason? Quote Link to comment
DanielC Posted March 12, 2013 Report Share Posted March 12, 2013 I believe it is M10-1.5, length unknown, currently. I have a longshaft Z five speed in a 521 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.