shakotan710 Posted February 15, 2013 Report Share Posted February 15, 2013 I would like to buy a clutch hard line, i need it for my 710. Would prefer local pickup or i can pay for shipping I'm in sacramento Link to comment
datzenmike Posted February 15, 2013 Report Share Posted February 15, 2013 If you have the old one remove and measure the length with a tape measure or a piece of string. It not take some measurements on the car with help from some pictures. Go to NAPA or some auto parts store and get the same thread fittings on a pre made length of brake line that is equal or next size larger. Bend it yourself. Use a baseball bat for the rounding. Link to comment
RedBanner Posted February 15, 2013 Report Share Posted February 15, 2013 I looked at the one I was hoping to send you, but its just cutt off by the slave. I strongly recomend just bending one, its super easy and cheap so you can mess up a couple times for under 20 $ 1 Link to comment
RedBanner Posted February 15, 2013 Report Share Posted February 15, 2013 A shop will bend and install one for 80 bucks or so, might be cheaper than a huge box with a ligyt little line in it.. Link to comment
bonvo Posted February 15, 2013 Report Share Posted February 15, 2013 just bend one up yourself if i can plumb my entire fuel system for under 10 bucks you can make one little clutch line its not hard at all Link to comment
shakotan710 Posted February 15, 2013 Author Report Share Posted February 15, 2013 ok, i might just use a line from a 240 and try to fit it, skib said that we might be able to bend it the way it needs to go Link to comment
crackerjack69 Posted February 15, 2013 Report Share Posted February 15, 2013 I have a 510 hardline if the 240 thing don't work out. Link to comment
shakotan710 Posted February 16, 2013 Author Report Share Posted February 16, 2013 how much would you sell it for, and what about shipping? Link to comment
crackerjack69 Posted February 16, 2013 Report Share Posted February 16, 2013 $20 plus shipping. Link to comment
shakotan710 Posted February 16, 2013 Author Report Share Posted February 16, 2013 ok, i'll let you know by the end of the weekend. is it around 34" long? Link to comment
Recommended Posts