Dudeman Posted February 15, 2013 Report Share Posted February 15, 2013 Located in Marysville, WA. Willing to ship most of this stuff, and it's all obo! Set of four (yes, 4) .020 over ITM pistons for a 280zx. The rings I have for them are .040 over, dunno what use they are but I'll throw 'em in anyway! $Sold!!! Open Chamber A87 head without cam, pulled from running motor, but appears to have been shaved $40 Front Sump oil pan & pickup from a Z20E clean and in great shape save for a small dent near the drain plug $25 Distributor from the same Z20E, complete minus 2 plug wires. Very clean, but I have not verified that it works $Sold L18 Pistons and rods, light rust but very usable. Buy these and I'll throw in an L18 block and crank (also very usable) for free! $20 Brand new brake pads for a ball joint 620 $10 Early 620 wiper motor, L-series fuel pumps, 620 13/16" brake master cylinder, 620 clutch master cylinder $5 a piece And last but not least... custom L4 SU intake made from a cut and sealed L6 unit. Ran great on the L18 it was pulled from but you might need to poke a hole in the firewall to clear a float bowl. Very cool piece just... not my style :) $free!!! So you can see how it mounts... Link to comment
EricJB Posted February 15, 2013 Report Share Posted February 15, 2013 Pmed on the pistons. Link to comment
Dudeman Posted February 16, 2013 Author Report Share Posted February 16, 2013 Pistons Sold!!! Link to comment
d510addict Posted February 16, 2013 Report Share Posted February 16, 2013 Pm'ed you about the dizzy yesterday get back to me. Thanks Derick Link to comment
datzenmike Posted February 16, 2013 Report Share Posted February 16, 2013 This is a super good deal. Get the coil too. 22100-N8566 is for an '81 auto S110.... nice. Link to comment
Dudeman Posted February 16, 2013 Author Report Share Posted February 16, 2013 Pm'ed you about the dizzy yesterday get back to me. Thanks Derick Been busy sorry. This evening I'll get you a total for the dizzy shipped, and can send it out Monday if the paypal clears! Link to comment
Dudeman Posted February 20, 2013 Author Report Share Posted February 20, 2013 Distributor and coil sold, don't hesitate to make offers on anything else you guys want! Link to comment
d510addict Posted February 20, 2013 Report Share Posted February 20, 2013 Can you throw that pic of hte dizzy back up for me? thanks. Link to comment
Dudeman Posted February 22, 2013 Author Report Share Posted February 22, 2013 Sure, here you go! You get it okay? Link to comment
d510addict Posted February 22, 2013 Report Share Posted February 22, 2013 Ya but its an 8 plug :( I didnt notice it in the pic and didnt realize late model z20e used 8 plug double sadface...back on the hunt. Link to comment
Dudeman Posted February 23, 2013 Author Report Share Posted February 23, 2013 Awww. If you want to ship it back I would do a refund, but I dunno if it's worth it You might be able to make it work for you. Good luck in any event! Link to comment
LeMonsEatMaters Posted March 14, 2013 Report Share Posted March 14, 2013 Will oil pan and pickup work on a L20B? Link to comment
datzenmike Posted March 15, 2013 Report Share Posted March 15, 2013 It will physically bolt on but the two motors are mounted with different tilts to them. Oil pans bottoms are level with the ground so swapping a Z series onto an L series will be tilted In the picture below the one marked 510 will be any and all L series oil pans. The one marked 720 will be a Z series oil pan. Putting a Z series oil pan on an L series will result in at least 18 and closer to 20 degree tilt on the bottom.. Link to comment
rude_day Posted March 16, 2013 Report Share Posted March 16, 2013 And last but not least... custom L4 SU intake made from a cut and sealed L6 unit. Ran great on the L18 it was pulled from but you might need to poke a hole in the firewall to clear a float bowl. Very cool piece just... not my style :) $free!!! So you can see how it mounts... how much shipped to 93041? Link to comment
jputz Posted April 2, 2013 Report Share Posted April 2, 2013 Do you still have the L18 Pistons and rods? If you do what would it cost to ship them to 30415? Dont need the block but if you want to throw the crank in there with them that would be great!!!! Link to comment
Recommended Posts