red76datsun Posted September 3, 2012 Report Share Posted September 3, 2012 Hey guys. im 16 and new to datsuns. got a 1976 620 single cab with the 4 speed. i have the option of buying a 5 speed and was wondering if it bolts right in without new parts or does the drive shaft have to be shortened? any input would help. thanks guys Quote Link to comment
metalmonkey47 Posted September 3, 2012 Report Share Posted September 3, 2012 Get a ZX or Maxima 5 speed and it bolts right in. If you're not sure what the 5speed you're looking at is out of, measure it. Should be somewhere around 31-31.75 inches. Quote Link to comment
Ranman72 Posted September 3, 2012 Report Share Posted September 3, 2012 as long as it is a longtail transmission wich is the most comon one it will bolt right in just to be sure check the length of yours and then measure the new one should be about 31 inches if my memory is correct also make sure it is in fact an l series tranny good luck Randy Quote Link to comment
datzenmike Posted September 3, 2012 Report Share Posted September 3, 2012 Hey guys. im 16 and new to datsuns. got a 1976 620 single cab with the 4 speed. i have the option of buying a 5 speed and was wondering if it bolts right in without new parts or does the drive shaft have to be shortened? any input would help. thanks guys Nothing wrong with a 4 speed, in fact it's just as fast as a 5 speed actually. If you drive exclusively in town or rarely out on the highway then a 5 speed isn't really of much use to you. The intent of a 5th overdrive gear is to reduce engine RPM out on the highway while cruising along to improve gas mileage. It should never be used for passing, towing or climbing steep hills. Your '76 will have a long F4W71B 4 speed which just happens to be the same length of the FS5W71B 5 speed. It will drop in with no modifications other than keeping your release collar and speedometer pinion in the tailstock of your 4 speed. The release collar is matched to your present clutch size and your speedo pinion is likewise matched to your rear end ratio. The 5 speed may have a different collar and speedo pinion in it. Sources of FS5W71B 5 speeds that will fit (and work) in your L series motor : '77-79 620 truck* '80 720 truck* '77-'78 280z car '79- '83 280zx car** '79-'80 810 car '81-'84 Maxima * The '79 and '80 truck 5 speed has a wide ratio gear set ** The '80-'83 280zx have a close ratio gear set with extreme overdrive 5th gear ratios. All other years are a mid ratio in between. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.