zhent Posted May 28, 2008 Report Share Posted May 28, 2008 I have a pretty large parts stash, including a nearly complete '71 510 wagon. If you don't see something listed and you need it, ask, I might have it. I can provide photos of any parts before shipping to avoid confusion. Any and all prices listed do not include shipping. Obviously bigger items may be expensive to ship from Texas. Some unique items: Early 13" hubcaps - I think these are from a 410 or 411, and look like the 240z caps. - $50 14" plastic Maxima hubcaps - these are a little dirty and a couple of the spokes are cracked, but would be great for a driver, I do plan to clean them up a bit - $40 Under dash A/C unit pulled from 1971 Datsun 510. This is a dealer installed unit with an ARA brand name on it. The fans worked when I bought the car, but the compressor was seized, so I can't vouch for the overall unit though I don't see any reason for it to not work. - $100 Stainless steel trim - pulled from the '71 wagon, complete with mounting clips (though they're rusty and I would recommend replacing them) These run below the doors - $50 for the pair Stock intake and carb, complete with fuel rail, carb was rebuilt before removal - $175 I'm still looking in my garage for the air cleaner assembly I seem to have misplaced, and would be happy to include it if found for another $25 Again, lots more available, let me know what small parts you may be looking for. Link to comment
gokiburix Posted June 3, 2008 Report Share Posted June 3, 2008 I was wondering if you have the wagon tail light assembly for both left and right (housing, rubber, lens and frame). And how much? Thanks! -goki Link to comment
zhent Posted June 4, 2008 Author Report Share Posted June 4, 2008 I was wondering if you have the wagon tail light assembly for both left and right (housing, rubber, lens and frame). And how much? Thanks! -goki I have them, but want to hold on to them for the moment in case something happens to my euro tails (god forbid). I'll post up here if I decide to sell them. Link to comment
BUDDAH Posted November 10, 2008 Report Share Posted November 10, 2008 fenders???? crossettr@comcast.net Link to comment
zhent Posted November 10, 2008 Author Report Share Posted November 10, 2008 Sorry, they look like this.... Link to comment
jefe de jefes Posted November 11, 2008 Report Share Posted November 11, 2008 Any wagon Interior panels? Looking for rear cargo area and front driver/passenger sides. Link to comment
zhent Posted November 11, 2008 Author Report Share Posted November 11, 2008 I have all of those except for the tailgate. The rear sides have been cut out for 6x9 speakers. Make an offer. Shipping should be around $25 pretty much anywhere... They're light but bulky. Link to comment
Mark_Z28 Posted November 11, 2008 Report Share Posted November 11, 2008 The 510 wagon isnt an auto trans is it? If so I would need the crossmember and driveshaft if the auto trans is the longer version. Link to comment
zhent Posted November 11, 2008 Author Report Share Posted November 11, 2008 no, it was a 4-speed car. It's got a dog-leg five speed in it now... Link to comment
comply Posted November 11, 2008 Report Share Posted November 11, 2008 no, it was a 4-speed car. It's got a dog-leg five speed in it now... How much for the transmission xmember? and wiper motor. And are the wagon doors the same length/size as a 4-door? I need door panels :( Link to comment
zhent Posted November 11, 2008 Author Report Share Posted November 11, 2008 The transmission crossmember is a custom job done to get this trans to fit in this car. I'm not selling it separately from the trans. The original wiper motor was fried, I retro-fitted a 280zx wiper motor and got it to work, but honestly it's not the best solution, and more work than it's worth considering the other options out there. If I were looking to do it again, I'd try the mazda wiper motor swap - http://www.dimequarterly.tierranet.com/articles/mazdawiperswap.shtml The wagon doors are the dame length, but the window frames are taller. The doors won't fit. Link to comment
comply Posted November 11, 2008 Report Share Posted November 11, 2008 The transmission crossmember is a custom job done to get this trans to fit in this car. I'm not selling it separately from the trans. The original wiper motor was fried, I retro-fitted a 280zx wiper motor and got it to work, but honestly it's not the best solution, and more work than it's worth considering the other options out there. If I were looking to do it again, I'd try the mazda wiper motor swap - http://www.dimequarterly.tierranet.com/articles/mazdawiperswap.shtml The wagon doors are the dame length, but the window frames are taller. The doors won't fit. And I'm guessing you won't part with just the panels and such? :( I need to find an xmember for my dogleg install. Link to comment
hang_510 Posted November 11, 2008 Report Share Posted November 11, 2008 I was wondering if you have the wagon tail light assembly for both left and right (housing, rubber, lens and frame). And how much? i saw a set (no lens's) in very good cond but didnt have $60 for them:mad: if you want them i can try to grab them at the eagle rock swapmeet for you (you pay to ship to you) The wagon doors are the dame length, but the window frames are taller. The doors won't fit. IIRC the F door will swap, the R doors DO NOT. panels do swap between. Link to comment
zhent Posted November 11, 2008 Author Report Share Posted November 11, 2008 And I'm guessing you won't part with just the panels and such? :( I need to find an xmember for my dogleg install. I'm sure there's someone closer than Texas with whole doors you can swap. Link to comment
banzai510(hainz) Posted November 11, 2008 Report Share Posted November 11, 2008 Damn another 510 lost!!!!!!!!!!!!!!!!!!due to a crash seems like alot of cars getting hit lately what usually happens is people lower their cars and think ( i included) we can take 15mph corners at 60mph!!!!!!!!!!! Link to comment
zhent Posted November 11, 2008 Author Report Share Posted November 11, 2008 Damn another 510 lost!!!!!!!!!!!!!!!!!!due to a crash seems like alot of cars getting hit lately what usually happens is people lower their cars and think ( i included) we can take 15mph corners at 60mph!!!!!!!!!!! The crash was in 2004, I've been storing this thing ever since with dreams of putting it back on the road, but the longer you wait the bigger the project becomes. I would rather it's pieces live on elsewhere than send it to the crusher, so... Link to comment
comply Posted November 11, 2008 Report Share Posted November 11, 2008 I'm sure there's someone closer than Texas with whole doors you can swap. I'm in the middle of Utah :D no one's close. Link to comment
zhent Posted November 11, 2008 Author Report Share Posted November 11, 2008 I'm in the middle of Utah :D no one's close. California is closer than Texas... Link to comment
chumstone Posted November 12, 2008 Report Share Posted November 12, 2008 I need all the wiring harnesses, engine bay, under dash and back to the taillights. I don't want to be ripped off and not recieve parts. Is that fair?? Thanks, NW Link to comment
zhent Posted November 12, 2008 Author Report Share Posted November 12, 2008 I need all the wiring harnesses, engine bay, under dash and back to the taillights. I don't want to be ripped off and not recieve parts. Is that fair?? Thanks, NW you don't want these. They've been hacked up and I had multiple electrical fires... Link to comment
hang_510 Posted November 12, 2008 Report Share Posted November 12, 2008 I need all the wiring harnesses.... and back to the taillights. I don't want to be ripped off and not recieve parts. Is that fair?? i have the dash to rear section, missing the int dome lamp wires. good condition. i got ripped off so i have it still... Link to comment
NSRz32 Posted November 13, 2008 Report Share Posted November 13, 2008 have any pics of the steering wheel? Link to comment
Mark_Z28 Posted November 13, 2008 Report Share Posted November 13, 2008 How much for the dogleg and crossmember? Bet shipping wont be cheap to Alabama. Link to comment
Ultramagnus Posted November 14, 2008 Report Share Posted November 14, 2008 you still have the bottom door trim piece? how much shipped to 92805. Link to comment
zhent Posted November 14, 2008 Author Report Share Posted November 14, 2008 you still have the bottom door trim piece? how much shipped to 92805. sorry, sold. Link to comment
Recommended Posts