datsundash Posted August 12, 2012 Report Share Posted August 12, 2012 Read below, I edited this BS Link to comment
Siempreloco Posted August 12, 2012 Report Share Posted August 12, 2012 http://www.redlineweber.com/carb-kits/auto/nissan-truck/ Link to comment
datzenmike Posted August 12, 2012 Report Share Posted August 12, 2012 For years I've seen old webers sold for $50. and then they need an adapter. and then an air filter. and then the linkage won't fit a 510 or 620 or... and then the adapter is cracked, or the bolts come loose. then it leaks, it won't idle, "what! no electric choke???" endless problems. Don't look for a deal or you'll end up with a weber just as old as the Hitachi and just as worn out, rebuild 4 times with parts missing. Buy a new direct replacement carb from Redline. Has just about everything needed to get her running. Link to comment
datsundash Posted August 12, 2012 Author Report Share Posted August 12, 2012 Fuck it then, does anybody have a mikuni short runner manifold for dual 44's? I dont want some cannon junk or nismo un branded garbage. I want a Mikuni manifold only. Link to comment
yenpit Posted August 13, 2012 Report Share Posted August 13, 2012 Have you ever used dual sidedraft Mikuni/Weber/Solex carbs before? The Weber 32/36 downdraft is a relatively simple carb, and when in great condition (like datzenmike said!), they run great. Dual sidedraft carbs take much more effort to get to run properly, especially if the carbs are USED, and ultimately need to be rebuilt. Once properly tuned, they too are great, but.................... Link to comment
datsundash Posted August 13, 2012 Author Report Share Posted August 13, 2012 Yes I have run mikunis before, I have rebuilt L20b's I have bored, sleeved, honed, rebuilt, tune, turbocharged, cammed, all sorts of shit. Here is the last set of mikunis I ran. Im not sure how much more simple you an get besides the mikuni design, The mikuni is 10 times easier to work on then webers, I just wanted a weber to give to my brother for his birthday. Like I said, FUCK IT. DOES ANYBODY HAVE A MIKUNI SHORT RUNNER MANI FOR SALE? And why does everybody on this forum think that just because someone here is newer that they are a newb or some shit? Does it make you guys feel good to belittle someone? Link to comment
datzenmike Posted August 14, 2012 Report Share Posted August 14, 2012 You'll fit in just fine. Link to comment
yenpit Posted August 14, 2012 Report Share Posted August 14, 2012 'Twas a simple question, me lad! Just tryin' to help :crying: . Good luck with yer project! Let's see if anybody else wants to take a stab, trying to help this guy out......... Link to comment
hosestop@msn.com Posted August 14, 2012 Report Share Posted August 14, 2012 Hey man for starters where are you ? I have a few side draft manifolds (vintage I want too much)and have source for short cloned mikuni manifolds like you want ! maybe a real one in Victorville if he will separate,I am helping him with srde install, and he may have what you want or 2k for lz22 with ported head ect ,.Re. the set in pics ,those wire mesh screens never worked ! robbed top end on freeway.Call if So Cal (562)696-5995 Link to comment
datsundash Posted August 14, 2012 Author Report Share Posted August 14, 2012 Im out east, in the hills. lol Yeah I dont want some mikuni clone, I sold my last one too cheap! I liek the short runner mikunis because they dont have coolant passages, they fit the booster on most dattos without cutting a stack, the linkage bar mount, and the awesome throttle response. Honestly I thought about casting some mikuni manifolds using melted down L series heads. I just need one to make a mold. Link to comment
hosestop@msn.com Posted August 15, 2012 Report Share Posted August 15, 2012 I have a couple Develo manifolds was trying to get 500 on eatbay ,the guy in victorville has one I will see whats going on,also he has a BRE oil pan not installed. Link to comment
xxmass Posted August 15, 2012 Report Share Posted August 15, 2012 http://miami.craigslist.org/mdc/for/3144185283.html Link to comment
datsundash Posted August 15, 2012 Author Report Share Posted August 15, 2012 Thank you CHRISTmas dude. Link to comment
datsundash Posted August 26, 2012 Author Report Share Posted August 26, 2012 Had the manifold bought for 100$ shipped, and then another guy offered him 150$ and took it. CUSS. Anybody else have a mikuni mani laying around? Link to comment
Recommended Posts