sam Posted April 2, 2012 Report Share Posted April 2, 2012 i have a rear adjustable sway bar with the bracket that holds on to the bar thing lol , what im missing is the hardware that bolts up to the control arm to the sway bar , where can i buy these parts Quote Link to comment
sam Posted April 2, 2012 Author Report Share Posted April 2, 2012 Sorry , datsun 510 sadan Quote Link to comment
Uber Deaf One Posted April 2, 2012 Report Share Posted April 2, 2012 If you just need the bolts you can go to a hardware store and find what you need. I'm assuming you already have the end links? Quote Link to comment
D52E Posted April 2, 2012 Report Share Posted April 2, 2012 Here is a scan of instructions for an Suspension Techniques rear anti sway bar. You can find it in the 4th post down: http://the510realm.c...hp?f=29&t=12777 Quote Link to comment
sam Posted April 3, 2012 Author Report Share Posted April 3, 2012 ughh the link wont open up or load ... i need the hardware that bolts to the rear control arm where the spring sits Quote Link to comment
thisismatt Posted April 3, 2012 Report Share Posted April 3, 2012 ughh the link wont open up or load ... i need the hardware that bolts to the rear control arm where the spring sits Try this: http://www.objext.co...structions1.pdf The hardware shown in that PDF is small rod ends (heim joints) Quote Link to comment
sam Posted April 3, 2012 Author Report Share Posted April 3, 2012 yes where could i buy these hiems joints and u brackets with the bearings and bolt? Quote Link to comment
sam Posted April 3, 2012 Author Report Share Posted April 3, 2012 is there any spacific website that i can order these parts using any part number? sorry i have way o many questions , thisnis how i LEARN lol Quote Link to comment
D52E Posted April 4, 2012 Report Share Posted April 4, 2012 I'm not sure there is a source where you can purchase all the components as a kit. You will have to do some research on your own. If you decide to piece the kit yourself - there are may sources for heim joints on the internet. One example that I noticed recently is Midwest Control Products. I have not purchased fromt them yet. www.midwestcontrol.com/ For the heim joints - you will have to meaure the holes on the swaybar to determine what size to order. You will need 2 male and 2 female heim joints. For the bracket - you may have to go to the hardware store and get creative. For the bolts and nuts - hardware store Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.