jefe de jefes Posted August 4, 2011 Report Share Posted August 4, 2011 3/17/12-I have one more if anybody is interested. (2nd LSD chunk has sold as well, thanks) R160 25 spline clutch type LSD chunk/guts for swap into your diff. I think you can use your own ring and pinion to create 3.7, 3.9, 4.11 etc? $200(first one pictured has been sold) Located near Fresno CA. Link to comment
aplyedmind Posted August 4, 2011 Report Share Posted August 4, 2011 what kinda diff will this work in ? you have pm also. Link to comment
jefe de jefes Posted August 4, 2011 Author Report Share Posted August 4, 2011 what kinda diff will this work in ? you have pm also. I bought it as a spare for my 510. Maybe it will fit other vehicles? Pm replied. Link to comment
NOTES... Posted August 4, 2011 Report Share Posted August 4, 2011 So wil this bolt into the r160 off the stock 510 diff? How much HP/TQ do u think it can handle? Link to comment
mswit209 Posted August 4, 2011 Report Share Posted August 4, 2011 i would also like to know if its for a r180 or r160 aswell Link to comment
jefe de jefes Posted August 4, 2011 Author Report Share Posted August 4, 2011 So wil this bolt into the r160 off the stock 510 diff? How much HP/TQ do u think it can handle? I believe so. I was going to buy a 3.7 or 3.9 open suby rear diff and then just swap this in. I have no clue as to how much hp/torque they can handle but I have seen people run these with sr20 swaps. Your stub axles or half shafts would most likely go before the LSD does anyways. Here's a cut/paste and link with some info that might help answer your ?'s. http://www.legacycentral.org/library/literature/differential.htm#What%20is%20a%20Limited-Slip%20Differential,%20and%20what%20are What if you find a 3.70 Subaru LSD, but want a 3.90 or 4.11 ratio? I have heard that the 3.70 Subaru units will fit inside the 510 R-160 cases, and that the 510 ring & pinions will fit inside the Subaru R-160 cases. I have not seen nor done this myself, so I cannot offer specifics, nor guarantee that this is the case. I am sure that Subaru LSD units will interchange inside all of the Subaru R-160 cases, using various Subaru R-160 ring & pinion ratios. I purchased a used Subaru 3.70 LSD unit and a used legacy 4.11 open R-160 differential and created a 4.11 LSD unit from the parts. I paid a rear-end shop $120 to drill the six 10mm holes out to 11mm so the Subaru LSD unit's bolts could be used, and to set up the newly assembled unit with the correct tolerances. You MUST use either the Nissan Motorsports LSD 10mm x 1.25 ring gear bolt set (Part # 99996-D3100, bolts cost $8 each and you'll need 8 of them), or just BE SURE to use the bolts that came with the LSD unit, not the ones from the open differential whenever you do this or your LSD innards will chew themselves to pieces. List member Gary Savage did put a Subaru LSD carrier from a 3.70 ratio differential into his 510 using the 510 differential case, the NISMO LSD bolt set and the Nissan 4.11 ring & pinion to get the 4.11 LSD he wanted, with no reported problems to date. Link to comment
nismo dr Posted August 4, 2011 Report Share Posted August 4, 2011 damn lsd is expensive now days, I remember when it was 3 for 10 Link to comment
jefe de jefes Posted August 4, 2011 Author Report Share Posted August 4, 2011 i would also like to know if its for a r180 or r160 aswell Aren't they pretty much the same internally besides the ring gear diameter? Idk, maybe someone can chime in. I bought it for a r160 swap. Link to comment
bonvo Posted August 4, 2011 Report Share Posted August 4, 2011 mmmmmmm do want but cant afford :( Link to comment
72SR510 Posted August 4, 2011 Report Share Posted August 4, 2011 Aren't they pretty much the same internally besides the ring gear diameter? Idk, maybe someone can chime in. I bought it for a r160 swap. No they are different! Ring gear diameter is much bigger on an R180... Link to comment
jefe de jefes Posted March 18, 2012 Author Report Share Posted March 18, 2012 Bump. Came across another in the shed last night. I'll snap some pics if there's any interest(raining atm). The one pictured up top ^^^ sold but the other looks just like it. Link to comment
jefe de jefes Posted March 18, 2012 Author Report Share Posted March 18, 2012 i'll take it! Are you in Canada? Pm me your zip code and I'll get you a shipping quote. Link to comment
hang_510 Posted March 18, 2012 Report Share Posted March 18, 2012 if for some strange reason its not sold, let me know. damn lsd is expensive now days, I remember when it was 3 for 10 the R160 gives you amazing flashbacks though. Link to comment
jefe de jefes Posted March 18, 2012 Author Report Share Posted March 18, 2012 if for some strange reason its not sold, let me know. the R160 gives you amazing flashbacks though. I've got 2 peeps in front of you. I don't have the stub axles for this one. What you see is what you get. Link to comment
paramedicopace Posted March 18, 2012 Report Share Posted March 18, 2012 Bummer wish i would of seen this sooner. Link to comment
jefe de jefes Posted March 18, 2012 Author Report Share Posted March 18, 2012 2nd one has sold. Thanks Link to comment
Recommended Posts