metalmonkey47 Posted July 5, 2011 Report Share Posted July 5, 2011 (edited) Been working on some metal stripping the last few days, and ran across a flimsy bit of crap on the wiper cowl, that I found was cracked. Just curious how you guys would go about repairing it the "right" way. I doubt the metals going to be strong enough to weld to, or else I'd have stripped it off and welded up the crack. Edited July 5, 2011 by metalmonkey47 Quote Link to comment
Wide14u Posted July 5, 2011 Report Share Posted July 5, 2011 i would just replace it Quote Link to comment
metalmonkey47 Posted July 5, 2011 Author Report Share Posted July 5, 2011 i would just replace it Yeah, if that was an option I wouldn't be asking There isn't shit for 210 body parts around here. Quote Link to comment
Wide14u Posted July 5, 2011 Report Share Posted July 5, 2011 i was thinking 620 my bad Quote Link to comment
Wide14u Posted July 5, 2011 Report Share Posted July 5, 2011 maybe cut one off a 620 and piece it in Quote Link to comment
I'm BLUE Posted July 5, 2011 Report Share Posted July 5, 2011 Yeah, if that was an option I wouldn't be asking There isn't shit for 210 body parts around here. i was thinking 620 my bad maybe cut one off a 620 and piece it in Wait ,,, you both are correct ,,, :) ,,, think about it ,,, CUTTING out the contour of the same-type of wind-shield cowl ,,, from many datsun's ,,,or other cars in general ,,,,is going to be very similiar or identical curves ( possibly ) ,,, as to the one you seek on your 210 MM47 ,,, It MIGHT just take a little re-working ,,, you might be able to cut off another car/model/year/make ,,, hell ,,, why not !? Trial and error ,,, should be good man :) :D Quote Link to comment
Master-O-Turbonics Posted July 5, 2011 Report Share Posted July 5, 2011 Let me TIG weld in a patch panel. It'll be strong as ever. I thought you were supposed to be out of the 210 already ;-) Quote Link to comment
metalmonkey47 Posted July 5, 2011 Author Report Share Posted July 5, 2011 Let me TIG weld in a patch panel. It'll be strong as ever. I thought you were supposed to be out of the 210 already ;-) Tell me when and where and I"ll me ya I just wanna get it all buttoned up before she leaves. I don't want to sell it to someone in shitty condition. I want someone to be PROUD to own her! Quote Link to comment
Uber Deaf One Posted July 6, 2011 Report Share Posted July 6, 2011 Yep I would TIG a patch panel as well. :cool: Quote Link to comment
phatboycrxhf Posted August 24, 2011 Report Share Posted August 24, 2011 id cut and patch in 3 peices to get the proper shape Quote Link to comment
652100 Posted August 25, 2011 Report Share Posted August 25, 2011 Asking ratsuns guys how to do it properly lol jk Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.