need a five hole flywheel

[rata510]

i need a flywheel from an l 16 or l18 have to get my truck back on the road will pick up.

[datzenmike]

For your '74 truck?? An L16 or any L18 flywheel from a car won't work with your clutch. L16 and L18 car flywheels are 200mm, yours is a 225mm. You can always buy a new 200mm clutch.

[d510addict]

Where is Hayward?

[ggzilla]

hayward, minnesota on the border of iowa but i didn't think there were *any* datsuns left there

[krecs]

hayward, minnesota on the border of iowa but i didn't think there were *any* datsuns left there

 

i have 3 L18 flywheels with good pressure plate and disk $80.00 plus shipping

let me know if you need them also i make front and back disk conventions with aluminum brackets and cross member

[rata510]

hayward ca. next to oakland close to frisco

the motor came from my 510 so is a car engine

[Jester]

For what it's worth, I shipped a L20 flywheel in a $7. flat rate box. It's tight, but, it fit.

[Chris#51EPGraham]

Jester, you're right - thanks for the tip! The rate on that box size went up

to about $11.00 though.

 

I've got a stack of L16 sedan flywheels, $30 or $50 + shipping ($30 = needs

machining, $50 = nice surface and ready to install - I have both).

[murderwagon]

i got one fresh from the machine shop with a good clutch 60$ plus 10$ for shipping

[Bleach]

blah blah blah

[datzenmike]

On my stack of wheels, I've got 5 above ground and three below.