Eastcoast521 Posted April 11, 2011 Report Share Posted April 11, 2011 I just picked up the summer issue of Project Car Magazine and they do a complete swap of an normally aspirated SR20 into a '74 620. They used ITBs and a hybrid tranny consisting of the SR20 bellhousing and aRB20DETT tranny (FS5W71C). The only thing I didn't see was info on wiring. Pretty cool resource. Quote Link to comment
DISLEXICDIME Posted April 11, 2011 Report Share Posted April 11, 2011 Why the rb20 trans? Quote Link to comment
ninja philbo Posted April 11, 2011 Report Share Posted April 11, 2011 stronger shifter position is further forward and cheap Quote Link to comment
DISLEXICDIME Posted April 11, 2011 Report Share Posted April 11, 2011 Good to know Quote Link to comment
danfiveten Posted April 11, 2011 Report Share Posted April 11, 2011 Josh is going to explode in his pants when he sees this lol. Quote Link to comment
ninja philbo Posted April 11, 2011 Report Share Posted April 11, 2011 yea a ca18det bellhousing bolts on with not mods thats what we do when dropping ca18det's sr20det's vg30et's and such in 720's 620's and 510's or 1600 over here Quote Link to comment
ninja philbo Posted April 12, 2011 Report Share Posted April 12, 2011 of what exactly ?/ Quote Link to comment
sssr20det510 Posted April 12, 2011 Report Share Posted April 12, 2011 never mind LOL for some reason i thought he was building this LOL Quote Link to comment
motavated Posted April 12, 2011 Report Share Posted April 12, 2011 After reading this I went out and bought it. I will scan it in... I like the part where they do a nice write up regarding a fuel return line. 1 Quote Link to comment
motavated Posted April 12, 2011 Report Share Posted April 12, 2011 Here a few pages. I think this is the coolest mod in the mag for a 620... #3.) Here you can see how we welded one of the tube adapters to a short piece of 1"x.120 wall DOM tubing. (drawn over mandrel) tubing is the seamless steel tubing typically used for roll cages. If you need a great source of metal supplies, be sure to check out industialmatealsupply.com It has other cool stuff. If you want to see the rest, I guess will just have to buy it. I cant wait for the next issue! I wish they had a better walk threw on how they made the motor mounts. :( Quote Link to comment
ariascarlos1990 Posted April 13, 2011 Report Share Posted April 13, 2011 I think its cool they mention Ratsun in it. Quote Link to comment
dubber Posted April 14, 2011 Report Share Posted April 14, 2011 I gotta find this issue! Quote Link to comment
gumbyz13 Posted April 14, 2011 Report Share Posted April 14, 2011 Just picked one up at Barnes and Noble...Good Read. Need to find me an RB tranny for my SR swap Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.