bbqbill Posted January 19, 2011 Report Share Posted January 19, 2011 i have a 76 620 with a flintstone drivers floor. a post seam seal leaked for years and rotted the floor around the body mount and under the pedals .would it be better to fab a patch,or try to find a floor section. any help would be great.i have pics.,but i cant get them to load Quote Link to comment
Wide14u Posted January 19, 2011 Report Share Posted January 19, 2011 i think i would just patch it and use it Quote Link to comment
]2eDeYe Posted January 19, 2011 Report Share Posted January 19, 2011 Probably easier to fab a patch than it is to find a clean floor panel. Quote Link to comment
NOTES... Posted January 19, 2011 Report Share Posted January 19, 2011 I agree.. I have similar Problem on my 510 and i just made a stencil and gonna Cut out a piece of sheet metal to weld on it... Quote Link to comment
Rustina 510 Posted March 7, 2011 Report Share Posted March 7, 2011 2eDeYe' date='19 January 2011 - 09:59 AM' timestamp='1295459972' post='412837']Probably easier to fab a patch than it is to find a clean floor panel. Call z therapy in Salem Oregon, I got a full front, center, and rear Pan for both sides for only 50$ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.