wayno Posted November 24, 2010 Report Share Posted November 24, 2010 I would like to buy the back half of a datsun L320 pickup cab and the doors also if possible, I would prefer to get the parts I need off a truck that will never be lic. for the road again as these trucks are getting harder to find everyday. wayno Link to comment
jefe de jefes Posted November 24, 2010 Report Share Posted November 24, 2010 I have an extra 320 cab/shell. I'm keeping a few parts from it like the rockers. I can't remember what else I need from it. I cut the roof off at the base of the pillars though. Link to comment
wayno Posted November 24, 2010 Author Report Share Posted November 24, 2010 Hi there jef de jefes, I do need the roof and rockers, I have a L320 that I am going to be making into a kingcab L320, so I need the back 20" approximatly and at least one of the doors. Thankyou for responding. wayno Link to comment
izzo Posted November 24, 2010 Report Share Posted November 24, 2010 Jefe, ill take the car behind the l320. thanks :) Link to comment
jefe de jefes Posted November 24, 2010 Report Share Posted November 24, 2010 I'll try and get you some more recent pics tomorrow. Hope your not in a hurry. I need to remove the rockers first. Link to comment
jefe de jefes Posted November 24, 2010 Report Share Posted November 24, 2010 Jefe, ill take the car behind the l320. thanks :) Ha ha. This one?? Link to comment
izzo Posted November 24, 2010 Report Share Posted November 24, 2010 Ha ha. This one?? Shipping to 97138, thx :rofl: That would be totally cool to make a trailer out of, throw some seats in there, a trailer tongue then hit up canby :blink: Sorry for the thread jack wayno, im done :D Link to comment
wayno Posted November 24, 2010 Author Report Share Posted November 24, 2010 Remember this one, basicly I need the complete back half of a L320 to do the same thing, I usually I try to get everything top to bottom from the windshield back. like the piece in front of the truck in the picture below Link to comment
AZhitman Posted November 24, 2010 Report Share Posted November 24, 2010 Jefe, I need a front fender trim piece.... I have a mismatched set on my 320. If you run across one piece, OR a complete pair, let me know. So far we've seen 3 different trim profiles on 4 different trucks - ALL 64/65. Seems they just used what they had until they ran out. Link to comment
wayno Posted November 24, 2010 Author Report Share Posted November 24, 2010 I have come to the conclusion that how a datsun was put together depended on who showed up for work that day. :unsure: :lol: Link to comment
jefe de jefes Posted November 24, 2010 Report Share Posted November 24, 2010 Jefe, I need a front fender trim piece.... I have a mismatched set on my 320. If you run across one piece, OR a complete pair, let me know. So far we've seen 3 different trim profiles on 4 different trucks - ALL 64/65. Seems they just used what they had until they ran out. Hhmmm. I never paid attention to that. Didn't know there were differences. I might have an extra pair. I'll try and check tomorrow if it's not raining. I need to snap some pics as well. Link to comment
420n620 Posted November 24, 2010 Report Share Posted November 24, 2010 I would like to buy the back half of a datsun L320 pickup cab and the doors also if possible, I would prefer to get the parts I need off a truck that will never be lic. for the road again as these trucks are getting harder to find everyday. wayno I've got a 64~320 door/s, pm me if ur interested. Jefe, I need a front fender trim piece.... I have a mismatched set on my 320. If you run across one piece, OR a complete pair, let me know. I've got a 64~320 front fender trim piece, pm me if ur interested. Link to comment
sojourner_k Posted November 24, 2010 Report Share Posted November 24, 2010 Perhaps my parts truck is just the thing you need?Here she is... Link to comment
wayno Posted November 25, 2010 Author Report Share Posted November 25, 2010 Perhaps my parts truck is just the thing you need?Here she is... Hi there Sojourner_k, I also replied on your other thread, I wish you were closer, I am unable to see the Oics. because I do not have a facebook acct. Hey jefe de jefes, I suppose that the top could be welded back on, but you also are a bit far away also, and I am not to the point yet, where I will drive 14 hrs each way for the parts, yet. wayno Link to comment
jefe de jefes Posted November 25, 2010 Report Share Posted November 25, 2010 Yeah, the top can be welded back on quite easily. I don't plan on tossing anything soon so if your ever out this way or you know someone driving through here , let me know. I think I only need the rockers so you can have whatever else is remaining. Link to comment
sojourner_k Posted November 25, 2010 Report Share Posted November 25, 2010 Hi there Sojourner_k, I also replied on your other thread, I wish you were closer, I am unable to see the Oics. because I do not have a facebook acct. Hey jefe de jefes, I suppose that the top could be welded back on, but you also are a bit far away also, and I am not to the point yet, where I will drive 14 hrs each way for the parts, yet. wayno I fixed the pic problem. See it on Ratsun:-)I know plenty of good ole boys with trailers and time. I could probably get it to you for the right price. Link to comment
wayno Posted November 26, 2010 Author Report Share Posted November 26, 2010 Jefe, I need a front fender trim piece.... I have a mismatched set on my 320. If you run across one piece, OR a complete pair, let me know. So far we've seen 3 different trim profiles on 4 different trucks - ALL 64/65. Seems they just used what they had until they ran out. Hi there AZhitman, I thought I sent a PM to you with these pictures, but was unable to find the message, did you receive one from me. Does either one of these trim pieces look like what you need, the one with the red/orange background is a odd piece to me, the only one I have, it is a right front fender piece. wayno Link to comment
AZhitman Posted November 27, 2010 Report Share Posted November 27, 2010 It looks like the first one (white background) is the correct one. Which side is that? Here's a pic of the trim profile I need (the one on the left with my fingers on it): The piece on the right is incorrect but in great shape - I'd be glad to send it to whoever finds me the right piece! :) Link to comment
wayno Posted November 27, 2010 Author Report Share Posted November 27, 2010 Hi there AZhitman, my 1964 NL320 has what you have on your door, my 63 L320 has what you have on the right front fender. Is the mismatched set on your NL320? To answer your question, the one with the white background is a right front fender trim piece, the one you need. The extra I have is not perfect, I can see 3 small issues, I am going to have to look at my NL in the morning to see what my NL one looks like. wayno Link to comment
wayno Posted November 27, 2010 Author Report Share Posted November 27, 2010 Hi there AZhitman, it took a while, my computer is acting up again, the pictures below show the imperfections as well as I can show them, I don't know what order there in, one shows the dent in the lower half about 8" from the front, another one(smaller) 5" farther back. The other two pics. show the door end where a few very small tap/pinpoint dents(in the wedge part at the end) are, and a small warp about a inch into the cut out where the "1200" badge is. wayno Link to comment
intense320 Posted January 21, 2011 Report Share Posted January 21, 2011 Shipping to 97138, thx :rofl: That would be totally cool to make a trailer out of, throw some seats in there, a trailer tongue then hit up canby :blink: Sorry for the thread jack wayno, im done :D how much would u want for the rear end of 510?? my datsun has a lot of rust in the trunck area and that would be very useful for me please message me asap wit price Link to comment
Recommended Posts