Braden Posted April 26, 2010 Report Share Posted April 26, 2010 so i picked up my first z yesterday, its defenitely going to be a long project!! here are a few pics to get you guys excited, then im gonna bust out the questions (please dont criticize me as i am a newb to the whole z car scene) Quote Link to comment
Skib Posted April 26, 2010 Report Share Posted April 26, 2010 Not to shabby! a nice set of 92's too :cool: hit me up if ya need some parts/ect. Quote Link to comment
Braden Posted April 26, 2010 Author Report Share Posted April 26, 2010 ok so heres the bad, it needs floor pans bad!!!!, it also needs alot of metal around the front of the floorpan and the battery tray is gone, the plus is that it will run if i can get fuel to it, and it has nice wheels. what i need to know is where to get floor pans fairly cheap and how do the 260 and 280z dashes interchange? it needs alot of metal work, a little interior work and minor work on the drivetrain. Quote Link to comment
Skib Posted April 26, 2010 Report Share Posted April 26, 2010 the 240/280 dashes dont interchange and the 260 stuff depends on the build month because its a mix of both lol. for repo Z floors go to Zedd Findings I have a driver side floor and frame rail of theirs to get rid of if your interested. whats under the hood? Quote Link to comment
Braden Posted April 26, 2010 Author Report Share Posted April 26, 2010 if they would let me buy just a passenger i would buy your drivers side, both of mine are gone, it needs lots of hours of metalwork, on wednesday when the rain goes away i will jerk the seats out and the 45 floor mats and inspect the lack of metal, its a shame someone could let it get like this!!!! as far as under the hood its teh stock L24 with msd wires and coil, dual webers!!!!! and a header!!! Quote Link to comment
Skib Posted April 26, 2010 Report Share Posted April 26, 2010 you can also get dash caps from MSA (thezstore.com) Quote Link to comment
Skib Posted April 26, 2010 Report Share Posted April 26, 2010 as far as under the hood its teh stock L24 with msd wires and coil, dual webers!!!!! and a header!!! pics :fu: Quote Link to comment
datsun723 Posted April 26, 2010 Report Share Posted April 26, 2010 :thumbup: Like the wheels. Like Skib said...more pics! Quote Link to comment
Braden Posted April 26, 2010 Author Report Share Posted April 26, 2010 pics are uploading of the engine! but hey here is what im gonna name her "VITAMIN Z" whatcha guyz think? good name or what?!?!?!?! Quote Link to comment
nismo dr Posted April 26, 2010 Report Share Posted April 26, 2010 Wow, looks like a great find. :thumbup: Quote Link to comment
Bleach Posted April 26, 2010 Report Share Posted April 26, 2010 The outside looks great Quote Link to comment
Braden Posted April 26, 2010 Author Report Share Posted April 26, 2010 The outside looks great yeah its not too bad but there are some fairly serious rust spots and it has been painted awhile back it has form what i can tell a skim of bondo in some areas but if you look on the other side of the panel there isnt like huge holes or anything. she is definitely gonna be a few year project to get to where i want it, its going to take me awhile to do the metal work once i can talk my friend into using his garage!!! lol Quote Link to comment
Skib Posted April 26, 2010 Report Share Posted April 26, 2010 not a fan of the duel webbers on the L6's get yourself some round top SU's :lol: Quote Link to comment
Braden Posted April 26, 2010 Author Report Share Posted April 26, 2010 im already a fan of them, hell they sat for 7 years, i poured gas in em and she fired up and idled smoothly untill the fuel ran out, i didnt use the chokes either, surely the webers arent that bad, hell all of the 620 guys love em Quote Link to comment
Skib Posted April 26, 2010 Report Share Posted April 26, 2010 surely the webers arent that bad, hell all of the 620 guys love em down drafts arent that great for Z car motors IMO most people ditch em and get some early round tops, tripples, or EFI Quote Link to comment
yellowdatsun Posted April 27, 2010 Report Share Posted April 27, 2010 Heck, the Webers are already on there, and they run fine, just leave 'em alone. No sense in replacing something that works. Quote Link to comment
Braden Posted April 27, 2010 Author Report Share Posted April 27, 2010 Heck, the Webers are already on there, and they run fine, just leave 'em alone. No sense in replacing something that works. they are almost new too, they are nice and clean inside, hell i rebuilt my hitachi on my 620 and it is already dirtier than these carbs!! Quote Link to comment
Yakuza Posted April 27, 2010 Report Share Posted April 27, 2010 how much did u get the Z for ? if u dont mind me asking? car looks nice, id leave the webers until they stop working..then id put efi.. Quote Link to comment
TheMission Posted April 27, 2010 Report Share Posted April 27, 2010 you can also get dash caps from MSA (thezstore.com) Redoing the dash yourself with some tenacity, a bit of filler foam, and some reading up on others who've done it online and you can keep the look of the original dash without slapping a cap on it. Don't be too surprised when you hit rust in places you didn't think it'd be! Are you going to take it down to nothing and rebuild, or are you going to go a little more moderate and clean up the rust and keep it on the road? Quote Link to comment
Braden Posted April 27, 2010 Author Report Share Posted April 27, 2010 Redoing the dash yourself with some tenacity, a bit of filler foam, and some reading up on others who've done it online and you can keep the look of the original dash without slapping a cap on it. Don't be too surprised when you hit rust in places you didn't think it'd be! Are you going to take it down to nothing and rebuild, or are you going to go a little more moderate and clean up the rust and keep it on the road? a little of both, ill redo the floors and the rails and part of the back deck, then i will probably seal those spots and paint them then drive it!!! Quote Link to comment
Braden Posted April 27, 2010 Author Report Share Posted April 27, 2010 how much did u get the Z for ? if u dont mind me asking? car looks nice, id leave the webers until they stop working..then id put efi.. in between 7 and 800 bucks Quote Link to comment
CharlieBucket Posted April 27, 2010 Report Share Posted April 27, 2010 Good deal! It really looks good, and the wheels are great. Quote Link to comment
Braden Posted April 27, 2010 Author Report Share Posted April 27, 2010 Good deal! It really looks good, and the wheels are great. the scary part is inside the car, the floorboars are gone and i got to looking at them and i think they have been replaced before which is bad bads bad because who knows what the body looked like before they painted it, this car has some extremely dark secrets inside of it! i will get pics tomorrow Quote Link to comment
hang_510 Posted April 27, 2010 Report Share Posted April 27, 2010 in between 7 and 800 bucks thats a range of $792 <_< for 2 4Oz??? :blink: what a deal!!! :thumbup: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.