vegas_datsun Posted April 25, 2010 Report Share Posted April 25, 2010 does anyone have info on doing a sr swap in the 620? i seen the thread with the guy that did the 240 cross member but i dont wanna go that route with the install. so far the motor bolts to the stock mounts but sits a little high in the rear. looks like i might have to cut or hammer the firewall up some to get it to fit. if anyone has info it would be greatly appreciated 1 Quote Link to comment
datzenmike Posted April 25, 2010 Report Share Posted April 25, 2010 Trucks have a cross brace in the middle/front of the oil pan and a steering cross rod between the steering box and the idler arm just in front of that. The oil pick up tube is at the back of the oil pan, (rear sump) where it is deepest. How did you get the SR20, which I believe has a front sump oil pan, to clear this? 1 Quote Link to comment
motavated Posted April 25, 2010 Report Share Posted April 25, 2010 FOR REALS! You used the stock mounts with no mods! Wooooooow.... I might do this.... 1 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 pics and description will be up in a min 1 Quote Link to comment
motavated Posted April 25, 2010 Report Share Posted April 25, 2010 WHOOO! Maybe an sr20 swap can solve my dieseling problem. :lol: 1 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 ">">"> more pics on the way. motor in steering installed and yes it clear the cross member 2 Quote Link to comment
Jersey Posted April 25, 2010 Report Share Posted April 25, 2010 why do you have the motor mounts on the frame upside down? 1 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 hmmmm... welll.. imma change that . didnt even knwo they were upside down. 1 Quote Link to comment
Jersey Posted April 25, 2010 Report Share Posted April 25, 2010 yea the little dowel pin on the motor mount goes up. 1 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 i have about 1 1/2 inch clearence 1 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 yea the little dowel pin on the motor mount goes up. i got caught up in the moment with it. thank you for letting me know though 1 Quote Link to comment
Jersey Posted April 25, 2010 Report Share Posted April 25, 2010 anytime...pics look good! 1 Quote Link to comment
motavated Posted April 25, 2010 Report Share Posted April 25, 2010 Can I please see pic's of the motor mounts connected? Thanks! 1 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 ok lifted the motor backout to rotate the mounts. imma upload the pics now 1 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 passenger side mount driver side mount 3 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 is there a way to change the topic title 1 Quote Link to comment
motavated Posted April 25, 2010 Report Share Posted April 25, 2010 Is there room for a radiator and fans up front? What year truck do you have? These are my last questions... Thanks and I don't know how to change the title... :( 1 Quote Link to comment
Skib Posted April 25, 2010 Report Share Posted April 25, 2010 is there a way to change the topic title yes. 1 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 Is there room for a radiator and fans up front? What year truck do you have? These are my last questions... Thanks and I don't know how to change the title... with a stock radiator and electric fan it fits. (but spxcae between it slim) about 2 inches. its cool questions al good thing 3 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 yes. how so? 1 Quote Link to comment
izzo Posted April 25, 2010 Report Share Posted April 25, 2010 how so? Ask skibby to do eet, and do it in PM and let him know what u want for the title.. hes admin 1 Quote Link to comment
motavated Posted April 25, 2010 Report Share Posted April 25, 2010 THANKS! Maybe this can help yah. http://community.ratsun.net/index.php?showtopic=537 1 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 THANKS! Maybe this can help yah. http://community.rat...p?showtopic=537 NICE!! thanks. yeah thats the one thing im a lil scared of is the wiring part of everything 1 Quote Link to comment
ariascarlos1990 Posted April 25, 2010 Report Share Posted April 25, 2010 wanna see pictures from top view. :D Nice project you got goin here. 1 Quote Link to comment
vegas_datsun Posted April 25, 2010 Author Report Share Posted April 25, 2010 in there nice and snug. just waiting on my ichiba top mount manifold and 50 trimm turbo 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.