Skib Posted January 29, 2010 Report Share Posted January 29, 2010 need the horn parts for the stock wheel (or a whole wheel) inner rubber shift boot black back seat (have a nice teal one to get rid of when I find one) black rear goon carpet 510 BRE spook weber air cleaner set of seat belts (the kind with the button releases instead of the latches) still tryin to think about what I need so Ill prob be adding some more... Link to comment
71DIMER Posted January 29, 2010 Report Share Posted January 29, 2010 Hey Skib, have you considered using a vinyl dye on your rear seat? There is this high quality stuff called SEM dye (not paint) that actually gets absorbed into the vinyl. This is a lot better than the cheap $7/can plastic paint stuff you buy at your local auto store. This SEM stuff is only available from auto paint supply stores or on the web of course. I picked up a few cans at my local car paint supply place and redid my CRX (yes I drive cars other than my Datsun) interior from blue to black. I gave it plenty of time to cure just to be safe and so far am very happy with it. I also did try the cheap $7 cans to do a few plastic trim pieces since this SEM stuff isn't exactly cheap but those pieces have some flaking on them since they are plastic paints and not dyes. Anyway I found a video showing a demo of it so you can get the idea. This might be a better alternative for you expecially since you mention your back seat is in good condition. Good luck. Link to comment
sssr20det510 Posted January 29, 2010 Report Share Posted January 29, 2010 I have that sss wheel Link to comment
Skib Posted January 29, 2010 Author Report Share Posted January 29, 2010 I have that sss wheel Im good on that one thanks, Iv got some 240z wood grain wheels that are almost identical but Im more partial to the stock black wheel. Link to comment
Skib Posted January 29, 2010 Author Report Share Posted January 29, 2010 Hey Skib, have you considered using a vinyl dye on your rear seat? There is this high quality stuff called SEM dye (not paint) that actually gets absorbed into the vinyl. This is a lot better than the cheap $7/can plastic paint stuff you buy at your local auto store. This SEM stuff is only available from auto paint supply stores or on the web of course. I picked up a few cans at my local car paint supply place and redid my CRX (yes I drive cars other than my Datsun) interior from blue to black. I gave it plenty of time to cure just to be safe and so far am very happy with it. I also did try the cheap $7 cans to do a few plastic trim pieces since this SEM stuff isn't exactly cheap but those pieces have some flaking on them since they are plastic paints and not dyes. Anyway I found a video showing a demo of it so you can get the idea. This might be a better alternative for you expecially since you mention your back seat is in good condition. Good luck. Ya Iv deff thought about just dieing it but I figure Ill see if theres a cheap one local, if not Ill just have to dye it. Prob see if the parts store stocks any SEM while Im there Link to comment
sssr20det510 Posted January 29, 2010 Report Share Posted January 29, 2010 check with 78kingcab or sinnful on the steering wheel i belive both of them have a stocker on parts cars Link to comment
Skib Posted January 29, 2010 Author Report Share Posted January 29, 2010 check with 78kingcab or sinnful on the steering wheel i belive both of them have a stocker on parts cars thanks :thumbup: Link to comment
hang_510 Posted January 29, 2010 Report Share Posted January 29, 2010 need the horn parts for the stock wheel (or a whole wheel) inner rubber shift boot black back seat (have a nice teal one to get rid of when I find one) dunno if there is an inner boot... gotta a decent used piece. aftermarket off ebay were ~$15 i have a horn pad (and 1 w/o the 1/2 ring) and a decent stock wheel (only small cracks seen from behind on the center) not sure im ready to sell the R seat... maybe by canby??? if you have the back (folding section) to the teal, id consider it a trade :) Link to comment
Skib Posted January 29, 2010 Author Report Share Posted January 29, 2010 dunno if there is an inner boot... gotta a decent used piece. aftermarket off ebay were ~$15 the like rubber boot bit i have a horn pad (and 1 w/o the 1/2 ring) and a decent stock wheel (only small cracks seen from behind on the center) Iv got a nice wheel and pad I just dont have the bits in between em :P most people dont want to pull apart a good wheel for just the horn parts so Ill but a complete wheel in what ever shape just to get the horn parts out lol not sure im ready to sell the R seat... maybe by canby??? if you have the back (folding section) to the teal, id consider it a trade :) think Iv got a line on the seat but if I get it Ill have a full teal rear that I woulnt be needing ;) Link to comment
hang_510 Posted January 29, 2010 Report Share Posted January 29, 2010 bits inbetween? the plastic clips? didnt i already commit to finding you some? :wacko: whats missing??? spring?... i have a 'plan' for the upper section... :mellow: Link to comment
Skib Posted January 29, 2010 Author Report Share Posted January 29, 2010 bits inbetween? the plastic clips? didnt i already commit to finding you some? :wacko: whats missing??? spring?... lol I have no idea whats sposta be there, Iv got a bare wheel and a bare pad. I found a spring under the seat that looks like a horn spring :P Link to comment
hang_510 Posted January 29, 2010 Report Share Posted January 29, 2010 I found a spring under the seat that looks like a horn spring :P if it fits the center of the pad and is ~2" long, thats prolly it. there are 3 plastic L shaped tabs attached to the pad that lock into the ring on the wheel. Link to comment
Skib Posted January 30, 2010 Author Report Share Posted January 30, 2010 if it fits the center of the pad and is ~2" long, thats prolly it. there are 3 plastic L shaped tabs attached to the pad that lock into the ring on the wheel. I dont even have the ring, I assume thats what bolts on to the 3 empty threaded holes on the wheel lol Link to comment
yello620 Posted January 30, 2010 Report Share Posted January 30, 2010 What are you needing for the weber air filter? The entire assembly? Link to comment
Skib Posted January 30, 2010 Author Report Share Posted January 30, 2010 What are you needing for the weber air filter? The entire assembly? ya Iv got one of the triangle foam filters and Id like to find one of these Link to comment
hang_510 Posted February 1, 2010 Report Share Posted February 1, 2010 http://www.racetep.com/weber.html or the local VW shop... i forgot to toot the horn... the 1 w/o the ring has the bits you need. Link to comment
benzo Posted February 2, 2010 Report Share Posted February 2, 2010 http://www.racetep.com/weber.html or the local VW shop... i forgot to toot the horn... the 1 w/o the ring has the bits you need. did you still need a weber air cleaner assembly for a DGV carb. I think I have a clean unit for say 25.00 plus shipping? Link to comment
mazdat Posted February 2, 2010 Report Share Posted February 2, 2010 69wagon has a complete wagon for parts, call him at 323-559-4181 Link to comment
datto510 Posted February 2, 2010 Report Share Posted February 2, 2010 That spring was for the horn button. There are a couple of little lock washers there too. It should all have been on the floorboard. I had a different wheel on there for a little while. :cool: Link to comment
Recommended Posts