Braden Posted January 21, 2010 Report Share Posted January 21, 2010 ah i live in kentucky we arent ever getting smog tests, all of us drive old smoky cars and trucks, and if we did i would tell em to kiss my big white ass, honestly if we had smog it would cause an uprising, egr blows, rip it off, fuck the epa, the polar icecaps have melted before, one little old datsun isnt gonna make that big of a difference Quote Link to comment
Braden Posted January 21, 2010 Report Share Posted January 21, 2010 true the egr is there for a reason but honeslty who wants 50 punds of worthless shit hanging in their engine bay making it look all fugly, not to mention its so much easier to work on with all that crap off Quote Link to comment
turbojunker Posted January 21, 2010 Report Share Posted January 21, 2010 So basically if i want to use my Offenhauser manifold and the weber, i need to get a completely new exhaust. There is no need for new exhaust. I knocked the guts out of the converter on my 79 510, put some pipe plugs in the holes left from the air tubes in the exhaust manifold, and put a big bolt where the EGR tube hooked up. All that other shit is too much work. I guess I'm lucky that I don't have the heat riser exhaust manifold. Quote Link to comment
Runslikeapenguin Posted January 21, 2010 Author Report Share Posted January 21, 2010 Why are you replacing the exhaust manifold???? There's nothing wrong with the one that was installed back in '79. Headers are a waste of time and money. Take the carb off and clean it out and it will run good enough till you put the Weber and intake on. When people don't know how the emission equipment works they think they are being cheated out of some power somehow. The only thing that convinces them is to remove it.... and it runs the same. :rolleyes: All that work and nothing. On the 620, the only thing that remotely reduces power (it at all) is the EGR system... and it isn't even working at full throttle or idle. Pull the hose from the EGR and plug it and it's de activated... simple. Otherwise, don't fuck with anything. Correct me if I'm wrong but i thought the offenhauser manifold wouldn't work with the stock exhaust. If it does then yes, no need for a header. The emissions is simply a maintenance issue. Its useless to me and i dont expect anything but a more simplified whole. Although the air pump does rob horsepower. Any kind of mass that the engine has to move that does not contribute to forward motion is robbing HP. Quote Link to comment
datzenmike Posted January 21, 2010 Report Share Posted January 21, 2010 If you had this set up from '75-'77 then yeah you would need a different exhaust. ... but the '78 and up didn't use this. The EGR pipe that comes out of the manifold?... just cut it about 2" up and squash flat and fold over. Or don't even bother and pul the vacuum line off and plug. Quote Link to comment
Braden Posted January 21, 2010 Report Share Posted January 21, 2010 well what did the 78 and up use ? just curious, i wouldnt smash the hoses over that looks like xxxxx rigged shit, that is the epitome of laziness! not to mention that isnt any guarantee that the exhaust will seal Quote Link to comment
datzenmike Posted January 22, 2010 Report Share Posted January 22, 2010 The '78 and up used a 4 into one manifold. Cutting and folding is just the easiest. I removed the pipe and crushed in a vice and folded it so it won't leak. Later I'll get a metric pipe plug for it. I used them for the air injection holes. Quote Link to comment
Runslikeapenguin Posted January 22, 2010 Author Report Share Posted January 22, 2010 The '78 and up used a 4 into one manifold. Cutting and folding is just the easiest. I removed the pipe and crushed in a vice and folded it so it won't leak. Later I'll get a metric pipe plug for it. I used them for the air injection holes. Can you give me a measurement for that plug? size and thread possibly. Quote Link to comment
Runslikeapenguin Posted January 22, 2010 Author Report Share Posted January 22, 2010 Anyone have any advice on getting this carb off? I'm pretty much as far as i can go with taking parts off and its still pretty much impossible. I can't wait to ditch all this Bullshit and have just a basic carb and manifold. Quote Link to comment
Runslikeapenguin Posted January 23, 2010 Author Report Share Posted January 23, 2010 Well i managed to get the carb off by cutting up one of my 12mm wrenches. the mains had crap in them and i cleared them, but what worries me is that the secondary was frozen shut. I had to pry it open with a screw driver on its linkage piece. its definitely screwed. I might just wait for my friend to ship my Offenhauser up here to WA, its not worth the work putting the old shit back on just to take it off again. Quote Link to comment
DanielC Posted January 23, 2010 Report Share Posted January 23, 2010 I am sorry, but this is late. Here is a picture of my l-16 carburettor wrench. It is just a 12 mm x 13 mm wrench I got at K-mart. I ground the sides of the jaws on the 12 mm end, and then I put is in a vise, and heated it up with a oxy-acetylene to bend it. I let it cool naturally. Quote Link to comment
datsunaholic Posted January 23, 2010 Report Share Posted January 23, 2010 I did mention that it took a special wrench to get the carb off. I just jot a cheap junk 12mm combo wrench and bent the open end over 45 degrees. I have a couple, because I lost the first one, made a second, then found the original. Quote Link to comment
turbojunker Posted January 23, 2010 Report Share Posted January 23, 2010 Can you give me a measurement for that plug? size and thread possibly. M8-1.25x12 I bought mine at Lowe's. Look hard at my picture and you can see them. Make sure you buy tapered ones. The first set I bought weren't and wouldn't start in the hole. Quote Link to comment
datzenmike Posted January 23, 2010 Report Share Posted January 23, 2010 Probably a pipe thread. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.