SpooF Posted September 10, 2009 Report Share Posted September 10, 2009 so i was wondering what the underside of the back flares look like because mine i think they didn't cut enough off so if anyone with bre flares can you take a pictures and show me how much you cut. thanks Quote Link to comment
Jesse C. Posted September 12, 2009 Report Share Posted September 12, 2009 Ok, here is my car with the BRE Flares, what part are we talking about here? Quote Link to comment
steve g Posted September 12, 2009 Report Share Posted September 12, 2009 im so sorry to hyjack this thread but.... are those the super rare series 1 alleycat wheels? Quote Link to comment
Jesse C. Posted September 12, 2009 Report Share Posted September 12, 2009 No, just plain 'ol Panasports. Wish they where the Alleycats though! I saw a set Alleycats a few years back at the Big 3 San Diego Auto Swap but I passed since they where the wrong bolt pattern. Wish I would have picked them up now, they only wanted a $100 for them! Quote Link to comment
yello620 Posted September 12, 2009 Report Share Posted September 12, 2009 Anybody have a picture of an Alleycat wheel? I have never even heard of them.. Quote Link to comment
whisper3H Posted September 13, 2009 Report Share Posted September 13, 2009 Does anyone make flares for the later model 510's?? Mines a 1981 and i cant find sh#t for it....lol Could i just buy flares for the older datsun and put them on, or is the fender different??? Quote Link to comment
Jesse C. Posted September 14, 2009 Report Share Posted September 14, 2009 The Allycats are about halfway down the page. http://www.mini-mayfair.net/13.html Quote Link to comment
freaky510 Posted September 14, 2009 Report Share Posted September 14, 2009 some nice cars you got going but he/she is looking for someone to take off a wheel and snap a few pics of the cut out and maybe even open your trunk and snap a few pics Quote Link to comment
SpooF Posted September 14, 2009 Author Report Share Posted September 14, 2009 some nice cars you got going but he/she is looking for someone to take off a wheel and snap a few pics of the cut out and maybe even open your trunk and snap a few pics what he said :) ..... thanks for the pictures guys Quote Link to comment
Jesse C. Posted September 14, 2009 Report Share Posted September 14, 2009 (edited) what he said :) ..... thanks for the pictures guys Oh, ok. Will post pics later. OK, here is a pic from the trunk area showing where the wheel well was cut to install the flares. I am going to fill them with sheetmetal tack welded back on and seal the gap between the body and the metal with GM Seam filler. Is this what you where looking for? Wheel Well mods? Edited September 14, 2009 by Jesse C. Quote Link to comment
SpooF Posted September 15, 2009 Author Report Share Posted September 15, 2009 perfect picture also if you can get one from under the flare Quote Link to comment
Jesse C. Posted September 15, 2009 Report Share Posted September 15, 2009 Well, that is slightly unfeasable at the moment considering the car is in storage and access is very tight. The wheel well was seperated at the center seam and cut out with the quarter panel lip. Then the flares where attached to the inside using some sort of super crazy glue, I think Naval Jelly perhaps, and that is it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.