mike Posted June 7, 2009 Report Share Posted June 7, 2009 (edited) Edited June 7, 2009 by mike Link to comment
mike Posted June 7, 2009 Author Report Share Posted June 7, 2009 I was reading the you might be a datsun owner post and realized I may as well sell some of this stuff... Im not going to be getting a 521 any time soon and Ive got doubles of the rest of the stuff so there is no sense tripping over it if someone needs it... heres a rundown and description 521 column cover, sun faded and the inner screw mounts are cracked but functional. 521 domelight, complete switch and wires sunfaded also, but its not cracked 521 taillights, theyve got overspray and grease on them but they are crack free and have the complete housings. Cleaned up they could be very nice driver quality, one of them has a chewmark/gouge (minimal) in it that would keep it from polishing up perfect. Non smog unported L16 intake with all little linkage holders and stuff Stock radio for 620, crappy pic but its got all knobs and complete harness with plugs and such, this will clean up to near perfect, its in better shape than the one in my 74. Complete set of 14x6 or so US indy mags. Tires are junk no caps or lugnuts, not perfect but good driver quality. I was going to try and find a full set of bias whitewalls to stick on them with some old school spinners but... If anybody has some 7" or 8" wide ones I might trade for two L16 exhaust manifold, I bought this one to use but I found another with out the little egr??? ports on top of the runners. GOOD SHAPE but the flange was cut a little short (I didnt do it and was pissed when I saw it) its still got enough meat to weld exhaust onto though. Damn near perfect 720 console with mount bracket no cracks or scratches, kinda dirty and the boots a bit worn but its in better shape than any of the other ones Ive seen lately... I stumbled across a decent 620 one with an armrest a week or so after I got this so... Prices??? I paid pretty good money for some of this and got deals on others so make a fair offer, If I dont like it Ill say no and stick it back in the shed... I dont have time to mail any of this stuff out right now (for about the next week and a half)and would prefer local pickup if its still around after that when I have time Ill ship it on your dime for actual cost. Ive also got an L20 flywheel, some KC 620 buckets (in mediocre shape) and a pile of random L brackets and attachments so if youre in need of something let me know and Ill check. Ive also got a very nice L20 short block (uncracked very minimal ridge on the cyl wall)... all the exterior bits are going on my Z22... I need an L18 flywheel with all the teeth in good shape and some GOOD front turn lenses for a 620, and I want one of steroids wrapkits or airdam in a bad kind of way for the KC. I also need linkage for sidedrafts (40s) for a 620. Link to comment
hector3g Posted June 21, 2009 Report Share Posted June 21, 2009 how much youre asking for center console and tail lights? Link to comment
hector3g Posted June 21, 2009 Report Share Posted June 21, 2009 Dou you have the front valance panel for this truck? Link to comment
ariascarlos1990 Posted June 21, 2009 Report Share Posted June 21, 2009 Hey I have some GOOD turn signal lenses. What are you asking for the 620 stereo? Link to comment
bonvo Posted July 8, 2009 Report Share Posted July 8, 2009 what about the 610 grill in the backround of the exhaust manifold pic :D Link to comment
hang_510 Posted July 8, 2009 Report Share Posted July 8, 2009 Complete set of 14x6 or so US indy mags. Tires are junk no caps or lugnuts, not perfect but good driver quality. If anybody has some 7" or 8" wide ones I might trade for two 6 bolt? i need 4 bolt for a 510. i have 3 14X7, so id only have 1 to trade :lol: Link to comment
fo0manchu Posted July 9, 2009 Report Share Posted July 9, 2009 6 bolt? i need 4 bolt for a 510. i have 3 14X7, so id only have 1 to trade :lol: they had 8 of these at the pick a part in stanton. Both sets off 240z and one set looked pretty wide and in good condition. This was last month, i wonder if they are still there. Link to comment
hang_510 Posted July 10, 2009 Report Share Posted July 10, 2009 one set looked pretty wide and in good condition. This was last month, i wonder if they are still there. there are SOOOOO many subtle variations :mad: on the 14X7 (most are 14X6) the lip is ~1.5" any plans to go back soon??? i could really use a 4th to complete my set.... Link to comment
Jekyl.Hyde.Kustoms Posted July 11, 2009 Report Share Posted July 11, 2009 How much for the mags? Link to comment
Jayden71 Posted July 11, 2009 Report Share Posted July 11, 2009 Have those tailights been sold yet?? Center console?? Link to comment
bonvo Posted July 12, 2009 Report Share Posted July 12, 2009 what about the 610 grill in the backround of the exhaust manifold pic :D huh huh huh what abou it :P? Link to comment
dohboy Posted December 11, 2009 Report Share Posted December 11, 2009 price of the tail ligts? location?? I'm in california can you send via mial? Link to comment
Recommended Posts