Logical1

My money is on blown head gasket, block is fine, head maybe slightly warped but doubt it. Search on Ratsun for the head removal and wedging of timing chain. Head gasket=$20 new oil, coolant, and oil filter=$60. I have done several 720 head gaskets in an a couple hours.

Funny enough I was walking through my folks place today and heard something about Putin endorsing Harris?!?!?! I just kept walking to the job in the guest room I am working on which is luckily the furthest away from the TV!

Horse lover eh?

For all the 720's I have done head gaskets on I use a wooden coat hanger broken in half, it truly seems like they are specifically designed to work as a Z chain wedge! the original hanger is one like this: I cut it down to this size and drill a hole in the top for the retrieval line like this: (E-tape for scale)

Nice score! With 30"+ tires (which are a little big for the Z24 IMO) I would absolutely get the power steering working again! No yards by you with a possible donor 720? A guy down the road from me has a crashed 720 I might be able to talk out of the steering pump.

Good memory! The vehicle I just fixed was an older gentleman's 620 that had been sitting for years and a friend of mine asked me to help him out. Luckily the L series was my first love and not hard to get going again! As for my beat the fuck up 720 I did the JB weld job on, I drove it for just over 3 months before getting a line on my current DD in the NW. I let the 720 sit for a while and when I had the time pulled the head back off to TIG weld up the void between chambers. The JB weld was still intact but the head gasket was obviously close to failing. I think the porous nature of JB weld and the imperfections of the patch allowed gasses to push through and erode the gasket. I welded the head up, gently sanded it down and it ran great. I gave that truck to a friend with a small farm here on Whidbey Island and it is still going strong last I checked!

A quick break from destruction... I just finished bringing another Datsun back to life with multiple electrical issues, bad rings, chipped valves etc. I wanted to give thanks to everyone on this site for the selfless sharing of knowledge and guidance in the past 15 years I have been here. I knew nothing about automotive engineering and now I help more people just as a hobby with their vehicles than I can count and it is all in thanks to everyone here who has joined together in a common cause! I think this is relevant to the destruction thread as there is such a clear divide politically between many of us, but even more that unites us! Now, back to the bickering! 🤣

In my most beautiful dreams this would be a reality! With the current state of affairs, technology, social divisions, and corporate influence, I don't think either party in the US, nor any other world power is willing or interested in speaking the truth and/or allowing the common folk to peak behind the curtain!

I agree with this statement, there is a lot of what if's from the left. That being said the only media I get exposed to is while I am in the house with my grandfather and fox news is reporting on what the left is saying!

https://ratsun.net/forum/22-other-datsuns-and-nissans/ It is a mix of the many models that are not as prolific as the others but you can find some good info in there!

That it is an abbreviative and not an acronym? 😁 Or that in this context it stands for: Trump Derangement Syndrome? I must say I was going back and forth with that or: Total Dissolved Solids... 😜

Wow, I am so out of the loop I had to look up what T.D.S. is an abbreviative for...🤣

This morning I went to put on some music from youtube and right at that moment my adblock decides to update and I get a commercial, It was the father of a child killed in the sandy hook shooting pleading with people to urge congress to ban assault weapons. He then goes on to describe how the shooter used large magazines as to not need to reload so much. He specifically asks to ban the AR15. Here is my question, Being semi-auto and having the ability to use large magazines does my ancient SKS fall under the assault weapons category? Its an old Russian model with a wooden stock, it jams so much I am lucky to get off a full magazine with having to fuck with it, Maybe that is a built in safety feature?🤣 It could also be the shitty Russian rounds I have with steel casings...

Take that shit to Destruction! 🤣

I HIGHLY doubt a relay will fix your issue. In essence the solenoid on the starter is just a high amperage relay. Have you put a meter on the small wire going to the solenoid spade lug and looked at what voltage you were getting there when you tried to turn it over? If you are dead set on putting a relay in , it is very simple as the existing wire coming from the ignition can act as the activator for the relay, then run a decent size wire to the main positive of the battery for the switched power. However I am willing to bet your voltage from the ignition is low or more likely bad grounding of the starter/engine to the battery. I have fixed many, many starters (and misc other electrical gremlins) by repairing/adding grounds to the head from the main negative battery terminal.

Riverside eh, that wouldn't be THAT crazy for an Arizona dweller to come grab the truck from you. I say toss it up on the Phoenix and even Las Vegas craigslist and see what happens!

That body is way too nice to use it for a parts truck! What part of California are you in? Plenty of folks in Oregon or Arizona would LOVE that truck and don't have the same silly smog laws. Specifically Arizona as any small truck sells for a mint, doubly so if they are a 4x4! I get asked at LEAST once an outing in my 720 if I want to sell it in AZ.

Spock quoted it best...

Holy shit even I am not that mean! Hillary is the antichrist but you are one UGLY MOFO!🤣

WOW! is a single thread on a FREE ad FREE forum really that upsetting to some folks? The thread is at the top BECAUSE so many people talk/vent/meltdown here! I can send you a chrome plugin that will load the site starting from the bottom up if seeing general discussion (talk about ANYTHING) first is that miserable for you!

This is an afterthought and Arnie says it best!

This site owned and paid for by a good friend of mine whom as I far as I know has never chimed in on the destruction thread. There are no ads nor do thread views make a bit of difference to ANYTHING! As for you not liking politics on the site, I ABSOLUTY LOATH Volkswagen but there are several VW projects posted in the other cars section. It is not difficult to avoid clicking on them even though I do out of a masochistic indulgence once in a while! 😜

I understand. What I was saying is that I will Jet it for 7000' after I get a FI vehicle and just leave it on the mountain so I don't have to re-jet it when I go to the valley. I imagine the jetting for 7000' feet would be VERY lean at near sea level!

Thank you, I was curious about the equation. It is curious as I drive her around the mountains (with no payload) and she still seems very peppy with no re-jetting of the weber. When I get a chance to go back home maybe I will actually re-jet her as I have the jets just hanging out on my parts shelf. I hadn't wanted to re-jet her because I was making trips down to the valley to see my father and didn't want her to run lean in low elevation. I am hoping to pick-up something 90's, cheap, and fuel injected to make the trips to the valley after this though and just leave the truck on the mountain!