Z-train

That blows.Krauts are normally thick headed.

Aha....Compared to Scott's?

Did you yell at yourself?

Hooker,Thorley & Hedders by Ed all void their warrantees if wrapped.

Ye old literalist ,you.

Drive away!!!!!Be carefull not to BANG the shifter too hard....

Wrapping voids all warrantees.Doesn't matter how good the steel or welds are.Ceramic coat them and be done.

But if she was sittin' on yer face-you could still hear the MP-3 player........

I sent Spectrum an e-mail.Haven't heard a word.

Fixed it for you.

Those numbers are from the bottom of the head to the top surface of the head where the rocker cover mates to it.Have the machine shop measure head height and if it is with in spec(they'll have the spec for that head),then take up the chain slack using the advance holes in the cam gear.THe tensioner is NOT designed to take up a lot of slack.

Do not use the shims.They change rocker geometry.For a U-67 casting the following numbers apply: New:4.26 minimum : 4.245 Other heads will be the same or similar. If there is enough "head" left,use the advance holes on the cam gear-that's what they're there for.

THREE B-210's in a boneyard on Park st in Tucson.

What we have here is a Ratsun Ass-off. My money is on Jon-I know what he does all day.

I have that intake on my LZ-23

Instead of a bike,my friend ended up with a 85 720 for $1200.00

Yes, it is......

Aircraft paint stripper

Wow,I advise you to drink heavily before going down to DMV-you're gonna need it. :sneaky:

Indeed.

To top it off he talked more than a used car salesman.He kept trying to defect attention away form the condition by saying things like: The gasket kit comes with it. The sissy bar comes with it. The service manual comes with it. On & on & on. He literally never shut up from the time we arrived to the time we left He had a dust covered GS1100 on a dolly that he claimed was his "real bike" and he just buys bikes,fixes them to "his standards"and flips them. Scotty-beam me up NOW!!!

Try Scott's old rubber.

Not even.

S wedish A utomobiles A lways B reak

Well,we went to Chandler to see it.When we arrived,there were two other guys there looking at it.Class-less move on the sellers part as he knew we were driving 90 miles and when we were getting there. The guy never shut his mouth the whole time: 14K original but here's the speedo I got from Ebay 'cause the old one was rusted. Was warm when we arrived-which means he didn't want us to see a "cold start". He's re-wired this,re-wired that.Turn signal cancel doesn't work,the seat doesn't have the locking mech.,New battery but needed to be jumped.Guy said he re-painted the tank because it looked like a kid beat it with a ball-peen hammer.Missing spring on the front brake lever. Just a typical CL disaster.