spriso Posted February 11, 2009 Report Share Posted February 11, 2009 Hi Guys, I have a bunch of parts (engines/transmissions/body parts) from 1963-1965 Datsun 1500 Fairlady Roadsters. These are all parts that have been pulled from various projects. Lots of weird and wonderful stuff here that might be useful for your RATSUN project! Help me clean out my shop before I scrap all of this!!! http://s730.photobucket.com/albums/ww310/michael_spreadbury/ Rebuilt G-15 1500 long-block engine/ 4-speed transmission combo $300... I have $500 in receipts for new parts from Rallye for this engine-- it has never been started! Complete used G-15 1500 engine and 4-speed transmission! $250 1500cc SU Carb sets (x3); $50 each Rebuilt Generator (I believe these are the same as 320 pickup?) $50 Rebuilt G-15 starter; $65 Complete 1500 rolling chassis with front drum brakes, rear axle, and a matching title! $200 obo I have TONS of other 1500 roadster parts, send me a PM or an e-mail at michael at spriso.com All parts are located in Corvallis, Oregon Thanks! Link to comment
datzenmike Posted February 11, 2009 Report Share Posted February 11, 2009 What rear end is that??? Link to comment
mklotz70 Posted February 11, 2009 Report Share Posted February 11, 2009 That used motor/trans might be a nice option in the NL. Considering a vg, but this would be a lot less work!!! How well did it run? Link to comment
spriso Posted February 11, 2009 Author Report Share Posted February 11, 2009 How well did it run? It ran decent... I can set you up with plenty of spares... :) Or go for the rebuilt long block and I will throw in a set of carbs! Michael Link to comment
tdaaj Posted February 11, 2009 Report Share Posted February 11, 2009 i was thinking the same thing mike, those are a heck of a deal. Link to comment
spriso Posted February 11, 2009 Author Report Share Posted February 11, 2009 i was thinking the same thing mike, those are a heck of a deal Which is exactly why this stuff is being posted here! I figured there would be some cross over projects with guys with 320s or 410/411 projects that might be into these mechanical parts. My shop is buried in 1500 parts that I don't need!!! :D Michael Link to comment
Recommended Posts