slodat Posted January 23, 2009 Report Share Posted January 23, 2009 (edited) 77-79 200SX Dogleg 5 speed. This is the short tail shaft 5 speed transmission that will bolt in to your L16 powered 521 and 510. No driveshaft mods. Fits stock shifter location. Includes shifter. $150 NOS 510 sedan rear crossmember bushings. These have not been available for a VERY long time. Brand new in the Nissan boxes. $250 NOS 510 Brake Master Cylinder (this is impossible to find). New in the box - $100 510 stock front crossmember (I have 2) $75 510 Steering box $SOLD Things I would accept in trade: 280ZX 5 speed Good weber 32/36 carb matchbox distributor Edited January 24, 2009 by slodat Link to comment
hang_510 Posted January 23, 2009 Report Share Posted January 23, 2009 Things I would accept in trade: matchbox distributor FOR: 510 Steering box $60 how tight is that box ;) ? i have a matchbox that aint that great and one that is. Link to comment
slodat Posted January 23, 2009 Author Report Share Posted January 23, 2009 (edited) The steering box is in good shape. It was in a 70k mile car that threw a rod. I'd call it a good one. Edited January 23, 2009 by slodat Link to comment
Phlebmaster Posted January 23, 2009 Report Share Posted January 23, 2009 (edited) Wish I had 150.00 for the dogleg. :rolleyes: I do have a remote box dizzy with a spare for parts, a non-smog intake, and a couple of other datto knick knacks if you are interested. :D I may also throw in my L16 exhaust mani, including the full exhaust. Edited January 24, 2009 by Phlebmaster Begging :) Link to comment
UNCIVLIZED1 Posted January 27, 2009 Report Share Posted January 27, 2009 I am new to the Datsun community and have alot of learning to do... and I am sure there are several threads to answer this.....but, the 5 speed tranny bolts up with no modifications at all??? I am about to replace the tranny in my L16 521 since mine locked up in 4th and I would rather a 5 speed since I didnt care much for the 4 speed when I was driving it. Please let me know what it will take and I might just go this route instead Link to comment
Phlebmaster Posted January 27, 2009 Report Share Posted January 27, 2009 I am new to the Datsun community and have alot of learning to do... and I am sure there are several threads to answer this.....but, the 5 speed tranny bolts up with no modifications at all??? I am about to replace the tranny in my L16 521 since mine locked up in 4th and I would rather a 5 speed since I didnt care much for the 4 speed when I was driving it. Please let me know what it will take and I might just go this route instead The dogleg just mounts right in...no real mods other than a possible tranny mount location. :D Link to comment
UNCIVLIZED1 Posted January 27, 2009 Report Share Posted January 27, 2009 The dogleg just mounts right in...no real mods other than a possible tranny mount location. :D so it bolts up to the block and at the driveshaft with no mods at all and I would only need to fab some new mounts to bolt the housing into the truck??? Link to comment
jefe de jefes Posted January 27, 2009 Report Share Posted January 27, 2009 (edited) the 5 speed doesn't bolt up to the driveline. Slips/slides in...... Oops. Threadjack. Might want to start a new thread. Edited January 27, 2009 by jefe de jefes Link to comment
ariascarlos1990 Posted January 27, 2009 Report Share Posted January 27, 2009 will that short tail dogleg fit in my truck fine? or will I have to get a different driveline? (im not an expert at it either) Link to comment
UNCIVLIZED1 Posted January 27, 2009 Report Share Posted January 27, 2009 the 5 speed doesn't bolt up to the driveline. Slips/slides in...... so now Im even more confused :( Link to comment
UNCIVLIZED1 Posted January 27, 2009 Report Share Posted January 27, 2009 so now Im even more confused :( I am thinking you meant that the driveshaft slides into the tranny instead of "bolting up" like my last reply had said which is not exactly what I meant but it came out that way, so let me reword it for clarification to make sure I get the right info......This tranny will bolt up to my L16 block and the driveshaft will attach with no modifications but I will have to make some mounts or a crossmember to attach the tranny to the frame of the truck and it will work perfectly??? Link to comment
datto510 Posted January 27, 2009 Report Share Posted January 27, 2009 so now Im even more confused :( I do that swap into a 521 in this thread. The freeze plug works great. http://forum.ratsun.net/showthread.php?t=8406&highlight=sushi+baby Link to comment
Recommended Posts