DatMo Posted August 6, 2016 Report Share Posted August 6, 2016 So I'm missing one of the rubber rings with my pierce manifold that fits between the carbs and the actual manifold. What's the risk of running without one? I can see an obvious air leak but I figured I'd take another one so the carb can have an even surface to be fastened on. Please let me know! Thanks :) Quote Link to comment
datzenmike Posted August 6, 2016 Report Share Posted August 6, 2016 Stock 2bbl Hitachi? Just a paper gasket should work. Quote Link to comment
DatMo Posted August 6, 2016 Author Report Share Posted August 6, 2016 Stock 2bbl Hitachi? Just a paper gasket should work.Sorry I should have been more precise. Didn't know pierce made single carb manifolds. This is for a dual side raft application with dellorto's. Quote Link to comment
Doctor510 Posted August 6, 2016 Report Share Posted August 6, 2016 Sorry I should have been more precise. Didn't know pierce made single carb manifolds. This is for a dual side raft application with dellorto's. Do not leave it out! match it at local auto parts store. Quote Link to comment
DatMo Posted August 6, 2016 Author Report Share Posted August 6, 2016 Do not leave it out! match it at local auto parts store.Will go to oreileys and get one right now then! Wasn't aware they sold them at stores. Quote Link to comment
datzenmike Posted August 6, 2016 Report Share Posted August 6, 2016 Just ask to look at their selection of O rings. Quote Link to comment
DatMo Posted August 7, 2016 Author Report Share Posted August 7, 2016 Solved. Thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.