AZGhost623 Posted August 11, 2015 Author Report Share Posted August 11, 2015 heh.. easy enough to fix.. would take this over rust anyday. B) Quote Link to comment
AZGhost623 Posted October 30, 2015 Author Report Share Posted October 30, 2015 Getting closer. A little more work on the nose and some trimming, then paint next week. Then the sanding starts all over again. Lots of changes, you can probably also see them here in this picture below. But some of the more subtle ones I posted below. Rain gutter delete Rear valance fill (its sitting weird because there is a jack under the car) Z Emblem quarter panel hole fill/removal: 3 Quote Link to comment
FlyinPat Posted November 2, 2015 Report Share Posted November 2, 2015 Are you going to use mk1 badges where the vents were or leave it blank? Quote Link to comment
Mr.Dean_Yates Posted November 4, 2015 Report Share Posted November 4, 2015 Damn! 1 Quote Link to comment
Mr.Dean_Yates Posted November 4, 2015 Report Share Posted November 4, 2015 I've gotta see this thing in person Quote Link to comment
drummingpariah Posted November 5, 2015 Report Share Posted November 5, 2015 Interested in seeing where this goes next, based upon what I've seen so far. Quote Link to comment
AZGhost623 Posted December 8, 2015 Author Report Share Posted December 8, 2015 Last pic for now. I'll be showing the car off in its final form at Import Face Off in Chandler/AZ on 12/13. This was taken right out of the paint booth after it dried then color sanded last week. Keep in mind this is extremely rough, there is no fishing, and its been gone over with sanding equipment. Quote Link to comment
AZGhost623 Posted December 14, 2015 Author Report Share Posted December 14, 2015 Showed the car at Import Face off the other day. I was the oldest car onsite, and in my opinion the most original and best car there amongst all the other modern day cars... Picture is quite big, so please click here to get the full effect. 5312x2988 http://imgur.com/3MZQeSe Safe for website, resized. 1024x576 1 Quote Link to comment
datzenmike Posted December 14, 2015 Report Share Posted December 14, 2015 Without it's emblems, how will anyone know what it is??? Quote Link to comment
AZGhost623 Posted December 14, 2015 Author Report Share Posted December 14, 2015 Without it's emblems, how will anyone know what it is??? Yeah, I got that alot. quite a few people were like whats a corvette doing here, until they saw the engine... lol Spoke with a guy for a bit about the car and said to leave it badgeless. Maybe do a datsun emblem on the dash, which is what I might do. Also suggested maybe doing a vinyl sticker on the light for the license plate, or a license plate frame that says "Do it in a datsun" or "Datsun Dare to be Different" I like the frame idea. Now just to find one or have a custom one made. Quote Link to comment
fritzdixxon Posted December 16, 2015 Report Share Posted December 16, 2015 Sweet, my gf says I like the beefy back. Lol Quote Link to comment
Slowpoke Posted December 29, 2015 Report Share Posted December 29, 2015 So glad you made this happen. Awesome job! Quote Link to comment
maltese Posted December 30, 2015 Report Share Posted December 30, 2015 Camshaft hood prop. Ballsy! Quote Link to comment
zspec Posted January 6, 2016 Report Share Posted January 6, 2016 AZGhost - nice build!! I can point you at folks that make those license frames, drop me an email or PM... Congrats on the work, looks stunning. Quote Link to comment
tr8er Posted January 6, 2016 Report Share Posted January 6, 2016 Without it's emblems, how will anyone know what it is??? Sarcasm? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.