Stock wheels question

[Corona521]

Nothin wrong with the current setup, I just really want stock hubcaps on

 

You can see here the back wheels are much different

 

This is the look I'm after

[Corona521]

If your only looking for an inch of clearance you can use these. I 've used them on tons of 4x4 swaps and drum brake chevys that i wanted to put small bore centers on . they will allow you to run stock 14's .

 

 

 

http://www.amazon.com/6x139-7-Spacers-Escalade-Suburban-Silverado/dp/B00B5HSDHO/ref=sr_1_7/179-6028389-3954223?s=automotive&ie=UTF8&qid=1424362290&sr=1-7

Thanks denmark I'll look into these as well

[Corona521]

I found this site yesterday while looking for a solution. They seem to offer a good variety of stock wheels, pricey though

 

http://www.akhwheels.com/pages/inventory.php?cat=3

[flatcat19]

I found this site yesterday while looking for a solution. They seem to offer a good variety of stock wheels, pricey though

 

http://www.akhwheels.com/pages/inventory.php?cat=3

 

That guy is up the road from me. He's a little...um, shady? Unrealistic. 

[flatcat19]

How much room do you need to clear the calipers with stock wheels in back?

 

Mklotz70 make 1/8" spacers. Should be enough. 

 

 

 

http://www.bluehandsinc.com/wheel-spacers.html

[Corona521]

When he said $130 per wheel I knew I'd have to look elsewhere.

 

I'll try the spacers first, that way if they work I'll just buy original datsun wheels.

 

Thanks for the help flatcat

[flatcat19]

You could got to the hardware store and buy 1/8"thick washers, in increments of 3. 12 should do ya good.

 

Put 3 over the studs first; mount your wheel. Check fitment. Do it again(1/4" now) until it fits. 

 

 

That's how I would do it if shopping for spacers.