NW510 Posted May 28, 2014 Report Share Posted May 28, 2014 Im putting a draw thriugh setup my L series (t25 w/ 40mm side draft) and was wondering what sandwich plate is needed for an oil cooler? Ive searched and cant find much. Although im not the best researcher. Thanks in advance. Quote Link to comment
metalmonkey47 Posted May 28, 2014 Report Share Posted May 28, 2014 Look for a fram PH8a sandwich plate. EDIT: 3/4 x 16 http://www.jegs.com/p/Trans-Dapt/Trans-Dapt-Performance-Products-Oil-Filter-Relocation-Kits/749339/10002/-1 Quote Link to comment
MicroMachinery Posted May 28, 2014 Report Share Posted May 28, 2014 Your searches have failed because you misspelled sammich. 2 Quote Link to comment
JoeCool Posted May 28, 2014 Report Share Posted May 28, 2014 Your searches have failed because you misspelled sammich. No kidding! I came here expecting to see a delicious sammich ON a plate... Well here ya go... Maybe I am just hungry. I eat lunch at 11:00 today, too damn early! Quote Link to comment
Tristin Posted May 28, 2014 Report Share Posted May 28, 2014 You can also pick one up from an automatic NA 280zx. Harder to find, but can be cheaper than a new unit. Quote Link to comment
datzenmike Posted May 29, 2014 Report Share Posted May 29, 2014 Actually it was only the '81.5 and on model year Turbo automatic zx cars that had the oil cooler. Quote Link to comment
ggzilla Posted May 29, 2014 Report Share Posted May 29, 2014 Oreillys, NAPS or Autozone: order Transdapt Oil Sandwich Adapter #1313 for 13/16x16 thread. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.