spudly13 Posted September 30, 2012 Report Share Posted September 30, 2012 Hey guys, ive been searching here and the realm to try and see some other boosted l series motors, im not too familar with the realm though and my searching here hasnt turned up to many results, im mainly interested in full motor low comp builds, if you know of one off the top of your head and feel like sharing a link id appreciate it! Also curious what the most hp out of a boosted l you guys have heard about. Thanks! Quote Link to comment
Laecaon Posted September 30, 2012 Report Share Posted September 30, 2012 Turbo 2.2L 7.87:1 Compression ratio with 45.2cc open chambered head. Parts: Z22 crank, 2.2E pistons, Z22S/L20B rods in Z22block or Z20/L20B block bored +2mm, s/2+r+p: 224.4 piston deck height: -3.45 (below block) Medium-Long Rod Turbo 2.05L Use 32.1mm piston, 149.5mm rod from late Z22E. These rods are not as sturdy as onther L series rods. Parts: L20B crank, Z2.2e pistons, Z22e rods, Z22 bock or Z20/L20B block bored +2mm over s/2+r+p: 224.1 piston deck height: -2.85 (below block) Short Rod L16 7.8:1 CR using 37cc cylinder head. Lowering compression of a L16 would be easier by just installing a open chambered L20B head and using stock bottom end. I just wanted to utilize a good 37cc head I already had. parts: L16 crank, L18 rods, L24 (flattop) pistons, L16 block. s/2+r+p: 205.2mm piston deck height: -2.70mm (below deck) Turbo L18 Use deep dished L20B pistons in a otherwize stock L18 for 7.63:1 compression ratio (using open chambered head) or bore +1mm and use dished 280Z pistons for 7.85:1 compression ratio. Quote Link to comment
spudly13 Posted September 30, 2012 Author Report Share Posted September 30, 2012 .... thats straight from the jason grey info! ive already read through that stuff, thanks though! Quote Link to comment
Laecaon Posted September 30, 2012 Report Share Posted September 30, 2012 Well I thought you were looking for full motor builds... And yes I know where its from, its amazing how many people never look there. Also you could always play around with the ozdat engine builder. http://www.ozdat.com/ozdatonline/enginedesign/ Quote Link to comment
spudly13 Posted September 30, 2012 Author Report Share Posted September 30, 2012 Thats interesting i havent seen that, im gunna play around with it tonight, im thinking about doing a slow winter build and improving upon what i have, i like seeing what other people have done, it helps me think about how i want to do this the second time around. the right way! Edit, didnt mean to sound snappy! haha i just figured that would be the first place people would look for info! Quote Link to comment
datzenmike Posted October 1, 2012 Report Share Posted October 1, 2012 http://www.the510rea...hp?f=27&t=10313 http://www.the510rea....php?f=30&t=407 Pay particular attn. to http://www.the510rea...iewprofile&u=93 's build. L20B turbo 250 RWHP. Not only does this car make power but designed to stay together. Quote Link to comment
spudly13 Posted October 1, 2012 Author Report Share Posted October 1, 2012 Thanks Mike! ill start reading through those! Quote Link to comment
datzenmike Posted October 1, 2012 Report Share Posted October 1, 2012 See you next month. Turbo Q&A is pretty large. Quote Link to comment
spudly13 Posted October 3, 2012 Author Report Share Posted October 3, 2012 Just made it through julians build, on to the next one! Quote Link to comment
Farmer Joe Posted October 3, 2012 Report Share Posted October 3, 2012 yeah i read julians build too... all 39 pages the SR with the SU's was pretty trick, but his turbo L is more cool!! lol Quote Link to comment
spudly13 Posted October 5, 2012 Author Report Share Posted October 5, 2012 Hey mike you wouldnt happen to have any other links that have info on "bertvorgon"s car would you? there was a little bit on it in julians thread, and i havent finished the turbo q and a yet theres probally some more in there as well Quote Link to comment
DISLEXICDIME Posted March 16, 2017 Report Share Posted March 16, 2017 Read this there is a lot of good info http://www.the510realm.com/viewtopic.php?f=30&t=407 Quote Link to comment
datzenmike Posted March 16, 2017 Report Share Posted March 16, 2017 This thread is 5 years old..... :lol: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.