mcmlxxxv Posted September 24, 2012 Report Share Posted September 24, 2012 Hi there I need picture of this area in a 510 to be able to duplicate it for the inspection ... even if they know I will put a 4 point harness in it , they want me to have the original seatbelt bolted in the car for the inspection ... thx guys Quote Link to comment
H5WAGON Posted September 24, 2012 Report Share Posted September 24, 2012 I just happened to take this the other day... Quote Link to comment
mcmlxxxv Posted September 24, 2012 Author Report Share Posted September 24, 2012 ho ! I tought they were only 2 point seatbelt ! I will check if I still have this one , thx :) and if someone have the lower one too that would be aawsome :D Quote Link to comment
H5WAGON Posted September 24, 2012 Report Share Posted September 24, 2012 I will take lower one for you unless someone beats me to it. Quote Link to comment
mcmlxxxv Posted September 24, 2012 Author Report Share Posted September 24, 2012 Thx very much :) Quote Link to comment
Tristin Posted September 24, 2012 Report Share Posted September 24, 2012 Ill snap a pic here in a minute for you.... They are 3pt. 2pts near the door and one on the trans tunnel. Edit: Here you go... Quote Link to comment
mcmlxxxv Posted September 24, 2012 Author Report Share Posted September 24, 2012 Damn ! I tought those were some after market things lol I will need tu install some new one :) big thx! I really needed that info . Quote Link to comment
Tristin Posted September 24, 2012 Report Share Posted September 24, 2012 Not unless they changed it after '69. You're welcome for the pictures. Quote Link to comment
datsunaholic Posted September 24, 2012 Report Share Posted September 24, 2012 '72s bolt to the floor. They don't use those hook things. Location is the same as those eye bolts though. 1 Quote Link to comment
Tristin Posted September 24, 2012 Report Share Posted September 24, 2012 '72s bolt to the floor. They don't use those hook things. Location is the same as those eye bolts though. There you have it. Same mounting, different type of belt. Quote Link to comment
mcmlxxxv Posted September 24, 2012 Author Report Share Posted September 24, 2012 '72s bolt to the floor. They don't use those hook things. Location is the same as those eye bolts though. this is what I figured out , I just went to the garage to take a look at what I have , the upper bolt fit no prob , but I will need to make some new post for the 2 lower .... hope they pass... Quote Link to comment
510T Posted September 24, 2012 Report Share Posted September 24, 2012 FYI for anyone having trouble with seat belt bolts they are 7/16-20 and should be grade 8. Quote Link to comment
H5WAGON Posted September 24, 2012 Report Share Posted September 24, 2012 Yeah every 510 I have seen has different seat belts....My orignal ones were the lever release typeMy lower mounts.....Mine are from a B210...not sure of the year, the shoulder part does not ratchet...Holds firm like amusement park ride. Mine i can disable the shoulder belt....which I think some stock ones did the same.....there is a little metal clip to hold them up out of the way. Quote Link to comment
mcmlxxxv Posted September 25, 2012 Author Report Share Posted September 25, 2012 those are also helpful ! the system I have is looking a bit like that too Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.