Z-train Posted July 15, 2012 Report Share Posted July 15, 2012 If anyone can put up some oics of the compressor bracket from a factory A.C. truck-i'd appreciate it. Quote Link to comment
datzenmike Posted July 15, 2012 Report Share Posted July 15, 2012 Even has a different lower rad hose inlet Quote Link to comment
ggzilla Posted July 15, 2012 Report Share Posted July 15, 2012 right over the fuel pump ... Quote Link to comment
Z-train Posted July 15, 2012 Author Report Share Posted July 15, 2012 Great.......now i need the compressor bracket(not the tensioner mount) & the hose inlet.Anybody? Quote Link to comment
datzenmike Posted July 15, 2012 Report Share Posted July 15, 2012 The 720 will bolt on and sticks more straight out but doesn't have the heater hose side pipe. Quote Link to comment
Spokane620 Posted July 17, 2012 Report Share Posted July 17, 2012 Where can I find a factory A/C switch? Can anyone help? Quote Link to comment
Z-train Posted July 17, 2012 Author Report Share Posted July 17, 2012 Thanks Mike. THe a/c switch still might be a good number at the dealer. Quote Link to comment
Z-train Posted July 18, 2012 Author Report Share Posted July 18, 2012 Mike,with a Sanden compressor,the lower outlet angle becomes a moot point-correct? Quote Link to comment
Spokane620 Posted July 18, 2012 Report Share Posted July 18, 2012 Thanks ztrain I'll give Em a call! Quote Link to comment
Z-train Posted July 18, 2012 Author Report Share Posted July 18, 2012 Try Courtesy in Tejas. Quote Link to comment
Farmer Joe Posted July 18, 2012 Report Share Posted July 18, 2012 heres a pic of the bracket on mine.. sans the pump.. and then i have the console inside... Quote Link to comment
Spokane620 Posted July 19, 2012 Report Share Posted July 19, 2012 Total different set up than I got. Mine comes out the dash vents, and the controller is in the shift console. I'll try to post pics of mine Quote Link to comment
Spokane620 Posted July 19, 2012 Report Share Posted July 19, 2012 I have the console out for new insulation and carpet right now. Quote Link to comment
Farmer Joe Posted July 20, 2012 Report Share Posted July 20, 2012 yeah, with all the varying AC setups ive seen, none really seem like they were nissan factory systems.. mine had to either be a port option, or dealership installed.. i just dont see nissan making that goofy bracket, when theres a brackets like what bonvo has on his 610.. now i may be wrong, but i think real factory systems might have been in 79 model year? i had an 80 720 that had AC that looked completely factory.. this is the same mount that i saw on bonvos car, once more.. any 620 AC option has been the added on kit, at least in my eyes.. i have most of mine taken apart right now, since im goin to be swappin engines soon, but i might try and retrofit the new engine with a pump from that era.. not sure.. Quote Link to comment
Z-train Posted July 20, 2012 Author Report Share Posted July 20, 2012 FJ..thanks!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.