jastrunk97 Posted June 1, 2012 Report Share Posted June 1, 2012 Can someone do a write-up on a wire tuck for a 620 i am looking to do a wire tuck and would like to know how :) Quote Link to comment
flatcat19 Posted June 1, 2012 Report Share Posted June 1, 2012 Nothing to it but to do it. Be the man. Make it happen. B) 1 Quote Link to comment
crackerjack69 Posted June 1, 2012 Report Share Posted June 1, 2012 I just did it to mine. Start on the driver side and work your way over :D Be ready to dive into a very tedious job... Quote Link to comment
jastrunk97 Posted June 1, 2012 Author Report Share Posted June 1, 2012 I just did it to mine. Start on the driver side and work your way over :D Be ready to dive into a very tedious job... Did you have to extend all the wires? Or is it just remove and relocate? Quote Link to comment
Laecaon Posted June 1, 2012 Report Share Posted June 1, 2012 Did you have to extend all the wires? Or is it just remove and relocate? It depends on how you route your wires. Start routing, and if the wires dont reach, extend them. And done. Quote Link to comment
Laecaon Posted June 1, 2012 Report Share Posted June 1, 2012 Derp double post. Accidentally hit my double click button... Quote Link to comment
jastrunk97 Posted June 1, 2012 Author Report Share Posted June 1, 2012 Ok, thanks. I am probably gonna do this after my engine goes back in so I can make sure everything reaches. (null) Quote Link to comment
metalmonkey47 Posted June 1, 2012 Report Share Posted June 1, 2012 Make sure to do a write up ;) 1 Quote Link to comment
DatDoug Posted June 1, 2012 Report Share Posted June 1, 2012 Did you & your dad rebuild your engine? Quote Link to comment
jastrunk97 Posted June 1, 2012 Author Report Share Posted June 1, 2012 Well it turns out that it has already been rebuilt so im not gonna dump a bunch of money into it. I just replaced some gaskets that where worn out. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.