Syncro Posted May 19, 2012 Report Share Posted May 19, 2012 So I'm thinking about throwing a rotary in one of my spare 280z's, yeah I know some people aren't a fan of rotaries and will likely say there unreliable, and then someone will say "why swap that when you can swap this." Someone else is bound to say "its not better its just different, stick with the L type or use a (insert turbo 4 cylinder here)." Honestly the only reason I'm considering this is because my brother has 3 12a's lying around, 2 of them I'm sure run. I like rotaries, just a different feel I get when I'm driving my rx in comparison to my other cars. I know someone has already fitted a z with a 13b but I'd like to stay away from fuel injection if I'm swapping anything, hell of a lot less wiring. and honestly the stock 12a's are about as short if not shorter then most 4 cylinders I've seen. the motor is so small that I'm sure mouting and even getting it behind the front axle would be cake, but won't know until mock up. Haven't decided if this is the route I wanna go yet, its just one of the many turns I could take, I've got the luxury of having a 4g63, sbc 305, sbc350, 12a, and a 3.4l v6 to choose from. Now I hate the v8 swaps simply because I hate hearing douche say "just toss a v8 in it" everyone who says that isn't always a douche, but alot of them are. Then you've got people who think the extra works pointless and say to just build up the L series. honestly putting the rotary in there could make it lighter, and possibly hand better, and vice versa, but really, I'd only be doing it for the opportunity and just to be different, not gonna waste time justifying a swap, its simply cause I want it to be different. and before anyone mentions it, I know they make a 4 barrel intake for the 13b's, but i have 12a's lying around. Quote Link to comment
metalmonkey47 Posted May 19, 2012 Report Share Posted May 19, 2012 IMO, If you're gonna do a rotary in a Z car, it better be a 20B or an R26B. Or else, it's gonna look real freakin small in that engine bay. Quote Link to comment
ggzilla Posted May 19, 2012 Report Share Posted May 19, 2012 20B would be awesome. Or use a 12A, swap the stock 150HP motor for a 130HP motor ... Quote Link to comment
metalmonkey47 Posted May 19, 2012 Report Share Posted May 19, 2012 You could always combine 2 12A's and be the datto rotary master :ninja: 1 Quote Link to comment
Syncro Posted May 19, 2012 Author Report Share Posted May 19, 2012 20b= $4k, but god do i wish I had a 20b 12a will be more like 90hp but I've helped people lift 12a's and I've helped the same people lift l28's, the l28 is definetly heavier. Quote Link to comment
metalmonkey47 Posted May 19, 2012 Report Share Posted May 19, 2012 90HP but imagine what you're gonna make at the wheels. Maybe 60? And no torque what so ever. It would be cool as hell, but it would cost a lot of $$$ just to make it compete with the L28. Quote Link to comment
Syncro Posted May 19, 2012 Author Report Share Posted May 19, 2012 You could always combine 2 12A's and be the datto rotary master :ninja: believe it or not I've considered this, but if I did that, I'm not sure if I could keep from putting it in my 87 rx7. technically if I got 3 12a's and mated them all together still have an inline six right? sorta..... Quote Link to comment
Rustina 510 Posted May 19, 2012 Report Share Posted May 19, 2012 You could always combine 2 12A's and be the datto rotary master :ninja: Holy shit that's a crazy ass idea Quote Link to comment
Syncro Posted May 19, 2012 Author Report Share Posted May 19, 2012 90HP but imagine what you're gonna make at the wheels. Maybe 60? And no torque what so ever. It would be cool as hell, but it would cost a lot of $$$ just to make it compete with the L28. well its was more like 90 hp to the wheels on stock 1st gen rx7's, and I imagine if I had a header, had my brother do the same nikki mod he did to his carb to it, it would be serious competition. Quote Link to comment
Syncro Posted May 19, 2012 Author Report Share Posted May 19, 2012 also, I just had a 30 sec intro to the r26b, I'd love that motor but I'm not god. Quote Link to comment
metalmonkey47 Posted May 19, 2012 Report Share Posted May 19, 2012 well its was more like 90 hp to the wheels on stock 1st gen rx7's, and I image if I had a header, had my brother do the same nikki mod hid to to his carb to it, it would be competition. Hell, while it's out of the car might was well rebuild it and do a nice bridge port or peripheral port. Nothing better then a sound of a ported rotary! Quote Link to comment
Syncro Posted May 19, 2012 Author Report Share Posted May 19, 2012 not that thats a bad idea, but I've have no clue what I'd be doing when i sealed the stock port and made a bigger one, and I don't have the cash for someone else to do it, also, no shop in albuquerque will even touch a rotary. And that motor scares me. Quote Link to comment
ArchetypeDatsun Posted May 19, 2012 Report Share Posted May 19, 2012 Here a 240z with a 20B Quote Link to comment
Ratty260z Posted May 19, 2012 Report Share Posted May 19, 2012 Auxiliary on Hybridz did a build thread on swapping a 13b into his Z, He never finished it though, but he has pictures of everything he did including motor mounts etc. also this. http://forums.hybridz.org/index.php/topic/103979-rotary-20b-powered-240z/ Quote Link to comment
Syncro Posted May 19, 2012 Author Report Share Posted May 19, 2012 I want a 20b, seriousy ,but I haven't got $4000, and to be honest, the only thing I'm seeing that I like about that blue 20b car, is the motor, those tail lights, and wheels can suck it. Quote Link to comment
FoxyRoadster Posted May 19, 2012 Report Share Posted May 19, 2012 I say 3.4L and boost it tell it wants to pop, its lighter then the V8's thats for sure. Quote Link to comment
Syncro Posted May 19, 2012 Author Report Share Posted May 19, 2012 here's what I'm thinking if I were to go with a 12a, nikki carb (home built, there actually not all that hard to build.), quad piped exhaust, some port work, not an all out bridgeport, I'm aiming for 300hp, my brother says a bridgeport or peripheral port is over kill. and is also against cross breeding, but lots of rotary guys I know are like that. Quote Link to comment
RedBanner Posted May 19, 2012 Report Share Posted May 19, 2012 You dont close any ports to ad a perph port, its another port added to the inside of the side seal pathe, not worth it, bridge port is the same thing. Just egg it out like you would an intake, I got my port templete from kurt robinson and it turns out he just copied a combanation of atkins and pinapples ports for the big teardrop. If you run a header remove the exaust sleave, you can make the exaust ports alot taller, but dont go much wider or it will eat seals. 12a,s are fun but not ideal. To much maintanence. Quote Link to comment
Syncro Posted May 20, 2012 Author Report Share Posted May 20, 2012 A12a's are cheap though. Well I'll tatry my hand at porting his trash motor just in case I screw up. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.