datsol b210 Posted October 9, 2012 Report Share Posted October 9, 2012 Do what I did. Nut up and buy fiberglass bumpers from Japan. :P They really aren't that expensive. Mine were about $395 shipped. When you figure that's less than $200 each, that's not too bad. do u have pictures of them installled on ur ride? Quote Link to comment
datsunfreak Posted October 9, 2012 Author Report Share Posted October 9, 2012 can i get help looking for the the jdm bumper for the b210?? Not from me. ^_^ Your best bet is to keep trolling eBay Australia a few times a week: http://www.ebay.com.au/ or ask WillDatsun. He sells Datsun parts out of the UK. He might have them? 1 Quote Link to comment
datsunfreak Posted October 9, 2012 Author Report Share Posted October 9, 2012 do u have pictures of them installled on ur ride? Oh goodness, no... That's way down the priority list for that car... :P But they look like this: Quote Link to comment
Dguy210 Posted October 9, 2012 Report Share Posted October 9, 2012 can i get help looking for the the jdm bumper for the b210??// i wanna get it Are you looking for the front, rear or both? The fronts tend to be somewhat more expensive, but you can get them either as a repo or NOS (not sure) out of Thailand, for $180 plus $250 shipping, the total shipping was the same for 1 bumper or 2. Alternatively, you can run no front, or a 1200 front and just run the JDM/AUS rear. Quote Link to comment
datsol b210 Posted October 9, 2012 Report Share Posted October 9, 2012 Are you looking for the front, rear or both? The fronts tend to be somewhat more expensive, but you can get them either as a repo or NOS (not sure) out of Thailand, for $180 plus $250 shipping, the total shipping was the same for 1 bumper or 2. Alternatively, you can run no front, or a 1200 front and just run the JDM/AUS rear. \yeah im sorta looking for both, out of what site do u say those prices come from? //ebay? with jst the rear i would be happy for now.... Quote Link to comment
datsol b210 Posted October 9, 2012 Report Share Posted October 9, 2012 Are you looking for the front, rear or both? The fronts tend to be somewhat more expensive, but you can get them either as a repo or NOS (not sure) out of Thailand, for $180 plus $250 shipping, the total shipping was the same for 1 bumper or 2. Alternatively, you can run no front, or a 1200 front and just run the JDM/AUS rear. so the 1200 bumper would bolt right on with out any modifications? Quote Link to comment
datsol b210 Posted October 9, 2012 Report Share Posted October 9, 2012 Not from me. ^_^ Your best bet is to keep trolling eBay Australia a few times a week: http://www.ebay.com.au/ or ask WillDatsun. He sells Datsun parts out of the UK. He might have them? will do thank you :thumbup: Quote Link to comment
datsunfreak Posted October 10, 2012 Author Report Share Posted October 10, 2012 so the 1200 bumper would bolt right on with out any modifications? No sir, not just a "bolt-on". But really close. I would only recommend it to someone who wanted to run no rear bumper. Quote Link to comment
datsol b210 Posted October 10, 2012 Report Share Posted October 10, 2012 No sir, not just a "bolt-on". But really close. I would only recommend it to someone who wanted to run no rear bumper. ok, beacause i had my eyes on a 1200 bumper on ebay but i think imma jst wait to get the perfect bumper on. Quote Link to comment
datsol b210 Posted October 10, 2012 Report Share Posted October 10, 2012 like this one Quote Link to comment
Dguy210 Posted October 25, 2012 Report Share Posted October 25, 2012 Finally, got hold of a 1200 front bumper. 73 and only ok shape but I will post pics when I have time to play with it. I also want to see how it looks with the B210 JDM rear bumper. Quote Link to comment
ggzilla Posted October 25, 2012 Report Share Posted October 25, 2012 B210 is 1.5" wider than B110, and the B110 bumper wraps around the side. Let us know how it fits on the wider car. Quote Link to comment
Dguy210 Posted October 26, 2012 Report Share Posted October 26, 2012 B210 is 1.5" wider than B110, and the B110 bumper wraps around the side. Let us know how it fits on the wider car. Lol... my guess is something like this :rofl: : Quote Link to comment
ggzilla Posted October 26, 2012 Report Share Posted October 26, 2012 Actually looks good. On a 1200 they sit away from the body sides (have clearance), but on the b210 they close -- looks better! Quote Link to comment
datsunfreak Posted October 26, 2012 Author Report Share Posted October 26, 2012 B210 is 1.5" wider than B110, and the B110 bumper wraps around the side. Let us know how it fits on the wider car. Ummm.... David?!? Did you even read the very first post in this thread?!? :rofl: Quote Link to comment
ggzilla Posted October 26, 2012 Report Share Posted October 26, 2012 Yes, but it was 50,000 Datsun miles ago ... Quote Link to comment
datsunfreak Posted October 26, 2012 Author Report Share Posted October 26, 2012 Yes, but it was 50,000 Datsun miles ago ... :rofl: Quote Link to comment
green280z Posted October 31, 2015 Report Share Posted October 31, 2015 So, i've been looking for bumpers for my 1975 B-210 for a while. Trying to figure out my options. I'm seeing a front 1200 UTE bumper at a reasonable cost i'm assuming that is the same as the regular 1200. What I don't like about that bumper is the cutouts for turn signals. I'd like to keep my stock grill and think it would look funny with two pairs of turn signals up front. I know I could possibly turn the spaces into fog lamps or something. Another option is to fill in the holes and either paint the bumper or have it re-chromed. I've found a rear fiberglass bumper, kinda costly and it has the tag cut out that is not needed on my car. So I could take this slightly overpriced bumper and fill in that cut out and paint it. So i've been looking at other options. Fiat 127 chrome bumpers, reasonable cost but my measurements indicate they are a little to narrow for my car. 1968 Camaro rear bumper made of fiberglass, cost is good at $70.00 each. I know i would need to cut them and shorten the width. This is looking like the best option for me at this point but I think the "height" is a little too narrow. Still searching for more options........ Quote Link to comment
B2Fresh Posted October 31, 2015 Report Share Posted October 31, 2015 "green280z" where did you find or can get the Camero fiberglass bumpers.? I may be interested in going that route for my ride.. 1 Quote Link to comment
B210GX Posted October 31, 2015 Report Share Posted October 31, 2015 . I've found a rear fiberglass bumper, kinda costly and it has the tag cut out that is not needed on my car. So I could take this slightly overpriced bumper and fill in that cut out and paint it. Still searching for more options........ One option is use that glass rear bumper with the plate below it. then add this piece to your car 1 Quote Link to comment
green280z Posted October 31, 2015 Report Share Posted October 31, 2015 Here is the first site I found. Before I pull the trigger I'll shop around. I think I have a 68 Camaro at work, forgot to look Friday. Need to take some measurements first. http://advantagefiberglass.net/Products.html Quote Link to comment
B2Fresh Posted October 31, 2015 Report Share Posted October 31, 2015 Here is the first site I found. Before I pull the trigger I'll shop around. I think I have a 68 Camaro at work, forgot to look Friday. Need to take some measurements first. http://advantagefiberglass.net/Products.html Thanks for the link.. Quote Link to comment
5280Datsun Posted October 31, 2015 Report Share Posted October 31, 2015 $20 more for metal http://www.rickscamaros.com/camaro-rear-bumper-chrome-1967-1968.html Measurements?http://www.camaros.net/forums/showthread.php?t=212236 Quote Link to comment
green280z Posted October 31, 2015 Report Share Posted October 31, 2015 I know the width will have to be shortened, Fiberglass would be easier to work with. Although metal would be good also, If I went metal i probably would not have it re chromed and just paint it. My concern for using this bumper is would the "height" be enough to cover what needs to be covered. Looking at the picture B210GX posted that bumper looks thicker top to bottom. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.