gene knight Posted April 6, 2012 Report Share Posted April 6, 2012 i am looking for a good turn signal switch from a 521 p/u Link to comment
thisismatt Posted April 6, 2012 Report Share Posted April 6, 2012 This guy has them http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&_trksid=p4340.l2557&hash=item564977a6a7&item=370599765671&nma=true&pt=Vintage_Car_Truck_Parts_Accessories&rt=nc&si=opFj8N9loZs0jd%252BuUkypCAwE0zU%253D&vxp=mtr&orig_cvip=true&rt=nc . I bought one from him a while back and he lists them every once in a while. I've also repaired non-working switches and unless it's physically broken, the problem is usually burnt contacts inside the switch. It's not super difficult to clean the switch, but you have to be careful when bending the metal prongs that hold the board in place, especially when bending them back after repairing the contacts since the board is very brittle and will snap. After cleaning the contacts I like to use Noalox to keep them clean Link to comment
wayno Posted April 6, 2012 Report Share Posted April 6, 2012 Get ahold of mr928, I sent him 3 of them. He is the guy that started this thread. http://community.ratsun.net/topic/42177-brake-bleeding/ Link to comment
Recommended Posts