kiznook Posted March 10, 2012 Report Share Posted March 10, 2012 Bought this flywheel with plans to clean it up and replace the friction surface, but got it home and weighed it and 8lbs is a little bit light for my build. Would be great for anyone that wants lots of fast revs. I'm sure you could probably take it to Otts in Portland and have it gone over fairly cheap, and still come out under half the price of new. $100 obo Also have a full set of chrome pathys. Wheels in great condition, no damage just dirty Tires are Dunlop radial rover a/t, 235/75r15. 2 in good shape, 2 with uneven wear. $100 Located in Vancouver WA, willing to meet as far north as Longview, and as far south as Portland metro. Link to comment
metalmonkey47 Posted March 10, 2012 Report Share Posted March 10, 2012 mmmm that flywheel... How much shipped to 30127? Link to comment
kiznook Posted March 10, 2012 Author Report Share Posted March 10, 2012 $110 shipped anywhere in the greater 48 Link to comment
datzenmike Posted March 10, 2012 Report Share Posted March 10, 2012 50$ cash in hand for the flywheel. 50$ cash in hand for the flywheel. If mm donk take it Read First: Rules for posting in the For Sale section Seller 1/ The item for sale MUST have a price on it. Auction style postings will not be tolerated. 2/ There must be a location where the item is being sold. Doesn't have to be exact. Failure to conform to the above rules will result in the post being removed. No exceptions! Sellers are strongly encouraged to include good quality pictures of the item for sale, a good description, a history, mileage and anything else applicable that will help the sale and limit unnecessary questions. Buyers 1/ Replies WILL be limited to questions about the item for sale and 'reasonable offers'. All others will be removed at the moderators discretion. 2/ Negative comments about the item or the price WILL NOT BE TOLERATED. These will be removed and the member warned once or temp banned, totally at the moderators discretion. No excuses, no exceptions. Buyers are also encouraged to make offers to the seller by p/m or their e-mail. Questions about price and or item quality may be directed to seller by PM. Concerns about the truthfulness of the seller's item should be made known via the Report button and moderators will remove or put the sale on hold, at their discretion. RedBanner you know better than this. These rules are to avoid low ball offers so that a seller can feel free to post any price he wants. This is not an auction either. At least not on my board. If you don't like the price and want to make low ball offer, contact the seller with a private message. He can accept or ignore you and we don't have to know about it. Link to comment
Danny Posted March 10, 2012 Report Share Posted March 10, 2012 What is wrong with it? Link to comment
metalmonkey47 Posted March 11, 2012 Report Share Posted March 11, 2012 Kiznook, what size is the flywheel? Assuming it fits 620 L20B (pretty sure they had a different size flywheel then the car L20B, but I could be wrong) Link to comment
kiznook Posted March 11, 2012 Author Report Share Posted March 11, 2012 The outer diameter is always the same. The friction surface is what varies. This one is a 225mm, which I think is the same as the 620(but could be wrong). Just have to make sure you use the correct size clutch and throw out bearing collar. Link to comment
datzenmike Posted March 11, 2012 Report Share Posted March 11, 2012 Kiznook, what size is the flywheel? Assuming it fits 620 L20B (pretty sure they had a different size flywheel then the car L20B, but I could be wrong) It will fit any 6 bolt L and Z series motor, probably the KA motors too. You could use your old 225mm PP and clutch or just buy an new one if you presently have say, a 200mm PP/flywheel. As mentioned, this is way to light for almost any street use. Link to comment
Danny Posted March 11, 2012 Report Share Posted March 11, 2012 If it only needs resurfaced I'll take it Link to comment
kiznook Posted March 11, 2012 Author Report Share Posted March 11, 2012 As you should be able to see from the pictures, the friction surface needs to be replaced. Link to comment
kiznook Posted March 13, 2012 Author Report Share Posted March 13, 2012 Flywheel pending, wheels still available...make offer or trade? Link to comment
lil89ram50 Posted March 13, 2012 Report Share Posted March 13, 2012 mmm i want flywheel :) Link to comment
kiznook Posted March 19, 2012 Author Report Share Posted March 19, 2012 surprised that no one wants a set of chrome pathys, is the price too high? Link to comment
Recommended Posts