paul97 Posted March 6, 2012 Report Share Posted March 6, 2012 The cylinder head is off my 1969 510 4 door L16 and the only number I could find is #17 on the back of the head. I did measure the intake valves and they are 1.50" which is an early head. The engine was running 2 weeks ago.I am asking $50.00 plus shipping. Here are some pictures of it. New price,$35.00 plus shipping!! http://s868.photobuc...ylinder%20head/ Here is a video of it running: http://s868.photobuc...nt=MOV08251.mp4 Link to comment
paradoxx Posted March 6, 2012 Report Share Posted March 6, 2012 no pics from the combustion chamber? if you cant find a number, show us a pic from the front side, maybe you have the casting number there. Link to comment
paul97 Posted March 6, 2012 Author Report Share Posted March 6, 2012 no pics from the combustion chamber? if you cant find a number, show us a pic from the front side, maybe you have the casting number there. I will take more pictures tonight. Where would the numbers be? Link to comment
Eagle_Adam Posted March 6, 2012 Report Share Posted March 6, 2012 bottom of the head on the passengers side below the spark plug holes. Link to comment
paradoxx Posted March 6, 2012 Report Share Posted March 6, 2012 or, on the lower right side of the timing chain inspection cover. Link to comment
paul97 Posted March 7, 2012 Author Report Share Posted March 7, 2012 I took more pictures but I am not sure if I found the numbers. I did find some stamped numbers on the back and cast in numbers in the front and rear. I did not see any pictures on the passenger's side by the spark plugs.Please look at the pictures and let me know which head it is if you can figure it out. http://s868.photobucket.com/albums/ab247/paulf97/L16%20cylinder%20head/ Link to comment
paradoxx Posted March 7, 2012 Report Share Posted March 7, 2012 its a 210 open chamber. How early is that one o rare, I dont know...lets wait for the experts to come and see. Link to comment
datzenmike Posted March 12, 2012 Report Share Posted March 12, 2012 210.... stock L16 head. Very common. Alleged to have been designed for the L14? motor and used on the L16 so not special, with small valves and ports. . Link to comment
merlin Posted March 12, 2012 Report Share Posted March 12, 2012 Sell it to the aluminum recyclers. Link to comment
paul97 Posted March 12, 2012 Author Report Share Posted March 12, 2012 Sell it to the aluminum recyclers. I would rather not if possible. Link to comment
Recommended Posts