datto510 Posted January 3, 2012 Report Share Posted January 3, 2012 All prices are obo and shipping is the responsibility of the buyer. Got some good stuff here guys, swoop it up. T3 coilover package with 250lb springs, needle bearing tophats and camber plates. Never used just removed from paper for pictures. Will not seperate please don't ask. These were to be sold with my wagon and still might. I will adjust the price of the wagon accordingly if they do sale here. $400 (Only one side shown) Dual 45mm Webber carbs on Cannon manifold with proper linkage. Made in Italy. Have original purchase receipt. A steal at $800. Formuling France 14in steering wheel with Datsun center button in great shape. Pulled from a previous 510 and been hanging on shop wall since. My heart wont break if this doesn't sell. Not sure what to ask.... SOLD!! :( GL tail lights in good shape with center garnish. No cracks in housing or lenses. One mounting tab is missing from center piece but could be easily fabricated in a few minutes. Also included is the proper harness to make this a plug-n-play affair. $500 Missing tab on drivers side... Dual 38mm SU carbs including everything pictured. Complete down to linkage and heat shield. These are the SSS carbs folks. SOLD! Matchbox dizzy with spare matchbox. SOLD! Older steel bumpstop spacers with mounting hardware. $50 Choke cable for dual SU setup with dash mount. Sorry, not sure if this is correct for the SSS carbs but did work for the Z carbs that was in my wagon. SOLD! 510 dash clock. Looks even better in person. $100 510 rear euro tail light lenses. Not the cheapo ones. These are stamped with "Everwing". $175 Link to comment
datto510 Posted January 3, 2012 Author Report Share Posted January 3, 2012 Fasten seat belt dash warning light. 73 year model only? SOLD! 210 gas pedal and cable used for converting 510 to cable pull. SOLD! EI coil $15 510 throttle linkage complete. $20 Hella E code H4 housings. The two outside lights are slightly different but both are E1. $80 Bumper over riders in great shape- includes mounting hardware. Some flash rust on the back side but very nice. SOLD! Throwout bearing and collar for 78/79 200sx dogleg transmission. Bearing is new, collar is not. $30 30mm wheels spacers made in America! Guy I ordered from sent the wrong size and told me to keep these. Who has flares? $50 Thrashed set of 510 taillights. One of the lenses is broken and chrome bent. Best used for parts. The plastic housings however are in good shape and not brittle or broken. SOLD Link to comment
Sinnful Posted January 3, 2012 Report Share Posted January 3, 2012 damn I kinda want those GL lights to match all my other tail lights Link to comment
metalmonkey47 Posted January 3, 2012 Report Share Posted January 3, 2012 Wanna sell that spare ign control mod for the dizzy? ;) Link to comment
stanza69 Posted January 3, 2012 Report Share Posted January 3, 2012 All prices are obo and shipping is the responsibility of the buyer. Got some good stuff here guys, swoop it up. GL tail lights in good shape with center garnish. No cracks in housing or lenses. One mounting tab is missing from center piece but could be easily fabricated in a few minutes. Also included is the proper harness to make this a plug-n-play affair. $500 Missing tab on drivers side... Nice GL tail lights n centre garnish..., pls pm me ur email...asap...;) Thxb4 Link to comment
datto510 Posted January 3, 2012 Author Report Share Posted January 3, 2012 Nice GL tail lights n centre garnish..., pls pm me ur email...asap...;) Thxb4 PM sent... Link to comment
datto510 Posted January 3, 2012 Author Report Share Posted January 3, 2012 Dizzy and spare matchbox sold! Link to comment
oldskoolvws Posted January 3, 2012 Report Share Posted January 3, 2012 Interested in the SU's. Shipping to 94550 and rebuild history? Thanks. Link to comment
datto510 Posted January 3, 2012 Author Report Share Posted January 3, 2012 Interested in the SU's. Shipping to 94550 and rebuild history? Thanks. Copy and pasted from PM to another member. $15 should cover shipping. I haven't done any modification to the carbs. In fact, I have never ran the carbs hence, I cannot guarantee them. I got them from an old Datsun guy that pulled them from an imported engine back in the 80's to do a fuel injected engine. He stashed them in his attic and there they sat for 25 years until I got my grubby paws on them. These are true SSS carbs, I have measured the intake at 38mm and it has the 220 intake manifold with all linkage, fuel lines, heat shield and air cleaners (should probably get new filters). This is not a pieced together set, these rolled off of the assembly line as a package and have stayed that way ever since. I'm not sure about the number of bolts on the carb, I will check tonight when I get home and PM you. Link to comment
dspeirn Posted January 4, 2012 Report Share Posted January 4, 2012 want that gas pedal. ill send you a pm. Link to comment
datto510 Posted January 4, 2012 Author Report Share Posted January 4, 2012 want that gas pedal. ill send you a pm. Replied. Link to comment
oldskoolvws Posted January 4, 2012 Report Share Posted January 4, 2012 Copy and pasted from PM to another member. $15 should cover shipping. I haven't done any modification to the carbs. In fact, I have never ran the carbs hence, I cannot guarantee them. I got them from an old Datsun guy that pulled them from an imported engine back in the 80's to do a fuel injected engine. He stashed them in his attic and there they sat for 25 years until I got my grubby paws on them. These are true SSS carbs, I have measured the intake at 38mm and it has the 220 intake manifold with all linkage, fuel lines, heat shield and air cleaners (should probably get new filters). This is not a pieced together set, these rolled off of the assembly line as a package and have stayed that way ever since. I'm not sure about the number of bolts on the carb, I will check tonight when I get home and PM you. Dibs on em. I'll take them. Link to comment
datto510 Posted January 4, 2012 Author Report Share Posted January 4, 2012 Dibs on em. I'll take them. Pmed. All paid for parts have been shipped and tracking #'s provided. :D -Erick Link to comment
Hurley Posted January 5, 2012 Report Share Posted January 5, 2012 Does steering wheel come with the adapter and is it leather? Link to comment
datto510 Posted January 5, 2012 Author Report Share Posted January 5, 2012 Does steering wheel come with the adapter and is it leather? Don't know if its an adapter or made for a 510 but it will bolt right up. Yes, the steering wheel is leather. Link to comment
datto510 Posted January 6, 2012 Author Report Share Posted January 6, 2012 List updated. Link to comment
jefe de jefes Posted January 9, 2012 Report Share Posted January 9, 2012 Items showed up safe and sound. Thanks Bump Link to comment
datto510 Posted January 12, 2012 Author Report Share Posted January 12, 2012 More parts have shipped and list has been updated. Link to comment
dreadsiren Posted April 22, 2012 Report Share Posted April 22, 2012 you wouldnt happen to have any drive line parts would you? looking for something that would fit an 82 200sx, cash or trade... from yoke to bearing or a whole one that would fit... heres my ISO post link http://community.ratsun.net/topic/42690-iso-1982-200sx-drive-line-shaft-front-section-yoke-at-rwd/#entry673956 Link to comment
Recommended Posts