metalmonkey47 Posted November 21, 2011 Report Share Posted November 21, 2011 (edited) SOLD SOLD SOLD Edited December 9, 2011 by metalmonkey47 Link to comment
datzenmike Posted November 21, 2011 Report Share Posted November 21, 2011 Second off is a Z20E EFI 8 plug dizzy. This is unknown condition, since I've never seen it run. Comes without IGN control module. $30 OBO + shipping Hahaha.... that's because the module is inside under the rotor. Trust me. Link to comment
metalmonkey47 Posted November 21, 2011 Author Report Share Posted November 21, 2011 Hahaha.... that's because the module is inside under the rotor. Trust me. Thx mike I've never pulled the cap since I wasn't planning on using it. Link to comment
Master-O-Turbonics Posted November 21, 2011 Report Share Posted November 21, 2011 Hey Monkey, you have an uncut harness for above manifold? I have an intake and all the parts, but my harness is all cut up... :-( it makes a pretty decent EFI kit for an L20B. Link to comment
metalmonkey47 Posted November 21, 2011 Author Report Share Posted November 21, 2011 Hey Monkey, you have an uncut harness for above manifold? I have an intake and all the parts, but my harness is all cut up... :-( it makes a pretty decent EFI kit for an L20B. Sorry, I don't have any more of the EFI crap for that motor :( PO didn't have any more then what I got. I'll keep an eye out though Link to comment
metalmonkey47 Posted November 21, 2011 Author Report Share Posted November 21, 2011 Morning bump. I'd like to sell this stuff fast, so everything but the pistons is open for resonable offers. Pistons I'd just like to sell for exactly what I payed. Link to comment
Eagle_Adam Posted November 22, 2011 Report Share Posted November 22, 2011 ill take the pistons and rings -paypal address? Link to comment
Icoblue Posted November 23, 2011 Report Share Posted November 23, 2011 Hey Monkey, you have an uncut harness for above manifold? I have an intake and all the parts, but my harness is all cut up... :-( it makes a pretty decent EFI kit for an L20B. So this will work on an L20? What about the L18? I'm dropping an L18 in my 620 and would love to have EFI in it. What would one use for an ECU? I saw the writeup from NICO (I think) that used the 200SX ECU. Is that what I'd have to find, or is there another choice? I'll be all over that manifold if I can make it work. Link to comment
metalmonkey47 Posted November 23, 2011 Author Report Share Posted November 23, 2011 ill take the pistons and rings -paypal address? You have a PM sir SOLD Link to comment
Eagle_Adam Posted November 23, 2011 Report Share Posted November 23, 2011 Pm replied to Link to comment
metalmonkey47 Posted November 24, 2011 Author Report Share Posted November 24, 2011 Pistons sold! Thanks eagle Link to comment
Rustina 510 Posted November 24, 2011 Report Share Posted November 24, 2011 What else is needed to apply this efi mani to a l20b? Link to comment
datzenmike Posted November 24, 2011 Report Share Posted November 24, 2011 Won't fit the L series. You will need to make your own EFI manifold. There was an L series EFI manifold made for the JDM SSS-E Bluebird (610) Rare as rocking horse shit. I've seen 280z intakes cut and welded together. Has the injectors holes already made. Link to comment
metalmonkey47 Posted November 25, 2011 Author Report Share Posted November 25, 2011 TTT Link to comment
Icoblue Posted November 26, 2011 Report Share Posted November 26, 2011 Thanks, Mike. It didn't look like it would fit from the pic, but turbonetics mentioned the L20B and it piqued my curiosity. I've heard about the Bluebird manifold, but like you said, rare. Thanks, guys. Link to comment
Recommended Posts