datsun88 Posted March 29, 2008 Report Share Posted March 29, 2008 Does anyone know if the front torsion bars on a 521 can be re-indexed or not if so how would you do it? If not what is the best way to lower the front end thanks. Quote Link to comment
shane_lxi Posted March 29, 2008 Report Share Posted March 29, 2008 Yes, there's a few writeups floating around with pictures and everything. search Quote Link to comment
fisch Posted March 29, 2008 Report Share Posted March 29, 2008 Look in here http://forum.ratsun.net/showthread.php?t=2129 Then show us pictures so we can check out your 521! Scott Quote Link to comment
Pacific coast Datsun Posted March 29, 2008 Report Share Posted March 29, 2008 If you just want a 2 or 3 inch drop you wont need to "re-index" the bars. For that just back off the bolts on the rear part of the bars. Re-indexing is a bit more time consuming but you can get a serious drop. I did both my 521 & 620 & it was worth it. lemem know if you need pics. Quote Link to comment
Llittle_Llama Posted March 29, 2008 Report Share Posted March 29, 2008 same here, not too bad....i can toss up some pics too..... Quote Link to comment
datsun88 Posted March 29, 2008 Author Report Share Posted March 29, 2008 Thanks for the info some pics might be helpful Quote Link to comment
Pacific coast Datsun Posted March 29, 2008 Report Share Posted March 29, 2008 This pic shows where the bar goes into the lower arm............I marked where the bar was BEFORE so that i knew how much it had moved afterwards.... There was a helpfull discussion on my thread when i decided to reindex mine, better to read there seeing as i had help from a few guys who had dont it already.............. http://forum.ratsun.net/showthread.php?t=769 Quote Link to comment
Llittle_Llama Posted March 29, 2008 Report Share Posted March 29, 2008 look for the thread i made on this....i think bleach was the one who found all the good links to help me....plus he has a good how to on it..... Quote Link to comment
datsun88 Posted March 30, 2008 Author Report Share Posted March 30, 2008 thanks for all your help did get one side done today Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.