BRE_dAtSuN Posted April 15, 2011 Report Share Posted April 15, 2011 Does anyone know where i can buy a fuel sender for a stock datsun 510 gas tank??... isint the resistance like 10ohms - 80ohms? ... Please anyone i need to know where to buy one Quote Link to comment
banzai510(hainz) Posted April 15, 2011 Report Share Posted April 15, 2011 I got one from the dealer about 15years ago maybe longer. Quote Link to comment
datzenmike Posted April 15, 2011 Report Share Posted April 15, 2011 25060 21002 from the dealer about $50 Quote Link to comment
BRE_dAtSuN Posted April 15, 2011 Author Report Share Posted April 15, 2011 thank you soo much mike... i knew i could count on you Quote Link to comment
banzai510(hainz) Posted April 16, 2011 Report Share Posted April 16, 2011 make sure it comes with the O ring or see if it needs one Quote Link to comment
datzenmike Posted April 16, 2011 Report Share Posted April 16, 2011 Yeah the O rings get crusty with rust. I have cleaned carefully and replaced them back in with good results but have also seen them on hardware/auto parts stores for cheap. Quote Link to comment
AtomChurch Posted April 16, 2011 Report Share Posted April 16, 2011 I cleaned my old sending unit by dipping it in vinegar over night and taking a q-tip and wiping off any sludge or gunk. Works like a champ now. Quote Link to comment
BRE_dAtSuN Posted April 17, 2011 Author Report Share Posted April 17, 2011 I cleaned my old sending unit by dipping it in vinegar over night and taking a q-tip and wiping off any sludge or gunk. Works like a champ now. hey thanks man ill try this meanwhile...ill see what happens Quote Link to comment
BRE_dAtSuN Posted April 30, 2011 Author Report Share Posted April 30, 2011 hey i had ordered that part from nissanparts.cc using the part # u gave me and i just received and email saying it was canceled due to that the part is no longer available =( any other ideas where i can get one Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.