Zeusimo Posted October 2, 2010 Report Share Posted October 2, 2010 A Few Days Ago I Noticed My Back-Up Lights Were On While My Dad Was Driving Away And The Next Day I Turned On The Truck To Check And The Back-Up Lights Were On And It Was On Neutral... Has Anyone Experienced This Before? They Worked Fine About A Week Ago And I Haven't Touched Anything Doesn't Make Sense Quote Link to comment
Z-train Posted October 2, 2010 Report Share Posted October 2, 2010 Failed switch at the trannny. Quote Link to comment
Zeusimo Posted October 2, 2010 Author Report Share Posted October 2, 2010 Switch Huh? Don't See A Switch Is It A Sensor Kinda Looking Thing? If So Which One Theirs 3 Quote Link to comment
datzenmike Posted October 2, 2010 Report Share Posted October 2, 2010 I'm going to assume it's a standard. This is the switch location.Pass side just behind the clutch arm. If those two wires were touching each other they would be on as well. This is the automatic interlock location, same side as the standard. It is connected to the selector and has two switches. One that allows start in PARK and NEUTRAL only and another for the reverse lights. The linkage or the switch could be badly adjusted or the two reverse wires (Red/Black stripe) touching each other. . 1 Quote Link to comment
Zeusimo Posted October 3, 2010 Author Report Share Posted October 3, 2010 I'm going to assume it's a standard. This is the switch location.Pass side just behind the clutch arm. If those two wires were touching each other they would be on as well. This is the automatic interlock location, same side as the standard. It is connected to the selector and has two switches. One that allows start in PARK and NEUTRAL only and another for the reverse lights. The linkage or the switch could be badly adjusted or the two reverse wires (Red/Black stripe) touching each other. . Huge Thanks!!! Gonna Go Pull One Off At Pick N' Pull Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.