zdizeeze Posted October 1, 2010 Report Share Posted October 1, 2010 My daughter bought a 72 wagon and the tranny is going south. Anyone have a floor shifter model? Link to comment
DISLEXICDIME Posted October 1, 2010 Report Share Posted October 1, 2010 probably better of getting a z auto and shortening the drive line Link to comment
qwik510 Posted October 1, 2010 Report Share Posted October 1, 2010 I posted this in the classified section a few days ago. Seems to be what you are looking for. Check out the post at this link. http://community.ratsun.net/topic/25028-nice-auto-trans-from-72-510-complete-and-ready-to-install/page__p__358239__fromsearch__1#entry358239 I would be willing to sell the trans without all the extras for less since you already have them. PM Me if interested. Link to comment
zdizeeze Posted October 2, 2010 Author Report Share Posted October 2, 2010 I saw your reply. I am going to see about getting something from the west coast. My daughter doesn't want to start modifing. I found a rebuild kit for 120.00 may go that rout Link to comment
bananahamuck Posted October 2, 2010 Report Share Posted October 2, 2010 I have a extra auto out of 70 510 my brother said it would slip every now and then going down the road. we never figured why cause it didn`t do it all the time. It drove from Auburn wa to my house Tumwater wa the day we took it out.If you think you could use any of it your welcome to it. Link to comment
qwik510 Posted October 2, 2010 Report Share Posted October 2, 2010 I have a extra auto out of 70 510 my brother said it would slip every now and then going down the road. we never figured why cause it didn`t do it all the time. It drove from Auburn wa to my house Tumwater wa the day we took it out.If you think you could use any of it your welcome to it. 1970 510 had the column shift trans. He needs a floor shift from the later 510s. Link to comment
qwik510 Posted October 2, 2010 Report Share Posted October 2, 2010 I saw your reply. I am going to see about getting something from the west coast. My daughter doesn't want to start modifing. I found a rebuild kit for 120.00 may go that rout Ok. Let me know. I will sell the trans and torque converter for $100 plus shipping. Link to comment
datzenmike Posted October 2, 2010 Report Share Posted October 2, 2010 I have a extra auto out of 70 510 my brother said it would slip every now and then going down the road. we never figured why cause it didn`t do it all the time. It drove from Auburn wa to my house Tumwater wa the day we took it out.If you think you could use any of it your welcome to it. .... also the '72 used the Jatco 3N71B after April '71. Prior to that a there were 3? other types Borg Warner 35s or based on them. They all fit the 510 but stuff like cooling lines, and linkages may not if replacing a 3N71B. Link to comment
Hurley Posted October 3, 2010 Report Share Posted October 3, 2010 I have a 3n71b tranny. yours for $50 plus shipping . Was in good running condition when pulled. I went to a manual tranny. Also have torque converter and all lines and shifter to go with it. Link to comment
zdizeeze Posted October 4, 2010 Author Report Share Posted October 4, 2010 I appreciate the offer. with shipping costs it becomes to expensive. We have decided to rebuild it. thank you for the help everybody Link to comment
Eagle_Adam Posted October 9, 2010 Report Share Posted October 9, 2010 Hey Zdizeeze, i am pulling the auto trans out of my 74 620 and changing to a manual. I live in portland the trans will be out in the next week, let me know if you want it. $75 bux and it yours. no shipping needed Link to comment
zdizeeze Posted October 9, 2010 Author Report Share Posted October 9, 2010 I will keep you in mind Link to comment
Recommended Posts