oneslick720 Posted June 7, 2010 Report Share Posted June 7, 2010 k here is what i got.... this is the motor that came in/with my parts truck.. after shoving it in the truck bolting the trans in i find out that the oil pan hits the steering linkage... my question is exactly what motor do i have and can anyone tell me about it... after alot of looking at the parts truck i discovered that the motor mounts were homemade and they flipped the linkage to the bottom of the pitman arms Quote Link to comment
datzenmike Posted June 7, 2010 Report Share Posted June 7, 2010 210 maybe. A14 or A15? Hey! That a 5 speed? Looks like a dogleg! Got better pix of the tranny? Quote Link to comment
oneslick720 Posted June 7, 2010 Author Report Share Posted June 7, 2010 No that's the only pics I have... its in the truck now... I honestly don't know what it is... the shifter is in the truck but I have never looked at it Quote Link to comment
Joss Posted June 7, 2010 Report Share Posted June 7, 2010 Hey, If it works lol. Looks a lot like one that was in a roadster I saw not long ago. Quote Link to comment
oneslick720 Posted June 7, 2010 Author Report Share Posted June 7, 2010 I bought the parts truck from a friend that bought it from a guy who was about to restore it and it was in and running like a champ.when.it was torn down Quote Link to comment
Farmer Joe Posted June 7, 2010 Report Share Posted June 7, 2010 put that lt1 in the truck! lol looks like what mike said. Quote Link to comment
oneslick720 Posted June 7, 2010 Author Report Share Posted June 7, 2010 Lt1 is another Datto project Quote Link to comment
ppeters914 Posted June 7, 2010 Report Share Posted June 7, 2010 Looks like an A-series to me. Looks a lot like one that was in a roadster I saw not long ago. I've seen/heard of various motors swapped into roadsters, but never an A-series, which are smaller than the stock R16 (1.6L) or U20 (2.0L). Don't make sense. Quote Link to comment
Joss Posted June 7, 2010 Report Share Posted June 7, 2010 Looks like an A-series to me. I've seen/heard of various motors swapped into roadsters, but never an A-series, which are smaller than the stock R16 (1.6L) or U20 (2.0L). Don't make sense. Guess it was special then Quote Link to comment
oneslick720 Posted June 7, 2010 Author Report Share Posted June 7, 2010 so what do you think i will have when i am done? will it be worth my time? all in all I'll have around 300 bucks in both of the truck together motor was said to run great before it was pulled out? what were the A series in and how can i tell for sure Quote Link to comment
ppeters914 Posted June 7, 2010 Report Share Posted June 7, 2010 http://en.wikipedia.org/wiki/Nissan_A_engine Quote Link to comment
Charlie69 Posted June 7, 2010 Report Share Posted June 7, 2010 Look below the # 4 spark plug, the should be a flat number boss that will be stamped with the motor type. Looks like an A14 to me. Quote Link to comment
oneslick720 Posted June 13, 2010 Author Report Share Posted June 13, 2010 after furter investigation it IS and A14 2 more questions 1 what is the stainless bypas line for coming up and along the side of the valve cover 2 what is missing off the back of the carb Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.