sick620 Posted February 10, 2010 Report Share Posted February 10, 2010 Is there any way to easily fix this without major cutting and welding? Quote Link to comment
motavated Posted February 10, 2010 Report Share Posted February 10, 2010 Maybe get some chains and weld it on that body. wrap the end of that chain around the tree and yank them out? Quote Link to comment
moparvwfreak Posted February 10, 2010 Report Share Posted February 10, 2010 and make it look good??? no. if you can find a straight core support, just cut and weld it. Quote Link to comment
motavated Posted February 10, 2010 Report Share Posted February 10, 2010 and make it look good??? no. if you can find a straight core support, just cut and weld it. Well mine came out ok. Look at my avatar... not bad for free... Quote Link to comment
Guest kamakazi620 Posted February 12, 2010 Report Share Posted February 12, 2010 Simple with no cut or weld REPLACE cab!!!! Quote Link to comment
thisismatt Posted February 12, 2010 Report Share Posted February 12, 2010 Simple with no cut or weld REPLACE cab!!!! More simple? Replace truck with new, undented one. EVEN EASIER!!! Quote Link to comment
Guest kamakazi620 Posted February 12, 2010 Report Share Posted February 12, 2010 More simple? Replace truck with new, undented one. EVEN EASIER!!! ^^^^BOO YAAAAHHH^^^^^ for the WIN!!!!! no seriously if ya have a stud gun it will be easy to pull out!!!! Quote Link to comment
Guest DatsuNoob Posted February 12, 2010 Report Share Posted February 12, 2010 I use the ghetto stud gun method. I grind the tips off 16d nails, put em on with me welder, then pull them shits out with my slide hammer. The trick is to go slow, and pull from different spots evenly to relieve the stresses in the panel. It will work, I do it all the time. Just dont go too fast or there is potential to tear the steel. You may not get it perfect, but you'll get 'er ruff enuff ;) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.