sr311det Posted February 7, 2010 Report Share Posted February 7, 2010 Complete Turn-Key VG33E 5-speed Swap SOLD Link to comment
bonvo Posted February 7, 2010 Report Share Posted February 7, 2010 fuck ma have to go to the bank and put one of my kidneys down as colateral to buy this thats just plain clean and the exact motor setup i want Link to comment
Just Joel Posted February 7, 2010 Report Share Posted February 7, 2010 Complete Turn-Key VG33E 5-speed Swap For Sale: Complete, turn key VG33E engine swap for a Datsun 510. This engine is a 2004 Nissan Xterra VG33E that has 5,000 original miles on it. This is a full, turn key swap complete with wiring, etc. No smoke, no noises, no leaks! Full plug and play setup into a 68-73 510! There is nothing to figure out, I have done all the work! Here is a list of the complete conversion: 1. 2004 Nissan Xterra VG33E engine (5,000 miles) • 200SX Intake Manifold, with 60mm throttle body. All EGR ports welded and smoothed with no unnecessary bungs or bosses • “Team Thump” custom 5 quart oil pan • “Team Thump” motor mounts • Nissan Competition “Euro” cams (.392”/264°) • Fully detailed with stainless hardware and powder coated valve covers • Custom exhaust headers, ceramic coated and TIG welded • 85 Amp Xterra alternator • Xterra starter (much smaller than a standard VG starter—lighter too!) • Oil filter moved from driver’s side to passenger side (early VG filter) • Modified water necks for cooling system, heater hoses connect to stock 510 heater • K&N air filter, stainless intake, and custom throttle cable (I will throw in the throttle pedal too!) 2. S12 5-speed transmission 3. Fully sorted, plug and play EFI wiring harness 4. New clutch (1,500 miles) 5. OEM VR-6 radiator/hoses with custom aluminum radiator cover, electric fan, and overflow bottle 6. Any other associated drivetrain parts, driveshaft, shifter, exhaust (to rear of transmission), etc. If it is related to this engine swap, you will get it. 7. A huge pile of VG-related spare parts also comes with this setup including an Infiniti M30 wiring harness/ECU! This swap has provided me several summers of fun, but it is time to do something different with my 510. If you have a 510 project that is looking for a highly detailed, and sorted out engine conversion, this conversion will save you months (years?) of time and dollars. You can have this installed in a weekend! $1950 Located in Corvallis, Oregon Call Eric at 971.244.3095 Very interested... you have a pm. Thanks Joel Link to comment
hessianben Posted February 7, 2010 Report Share Posted February 7, 2010 That's a great deal with all the kinks worked out!! Link to comment
fisch Posted February 7, 2010 Report Share Posted February 7, 2010 Nice mill man! Are there any videos of it? Good luck with the sale! Link to comment
paradoxx Posted February 7, 2010 Report Share Posted February 7, 2010 OMG! a tear just drop down my face........incredible opportunity, hurry up guys! Link to comment
sr311det Posted February 8, 2010 Author Report Share Posted February 8, 2010 SOLD Thanks to everyone Link to comment
goes2fast Posted February 8, 2010 Report Share Posted February 8, 2010 That would look great in my 620, too bad I have no money.:( Link to comment
paradoxx Posted February 8, 2010 Report Share Posted February 8, 2010 did Joel took it? ;) Link to comment
fisch Posted February 8, 2010 Report Share Posted February 8, 2010 SOLD Thanks to everyone So you have us curious what you are going to run next after this work of art? What are your plans? Link to comment
sr311det Posted February 8, 2010 Author Report Share Posted February 8, 2010 So you have us curious what you are going to run next after this work of art? What are your plans? I'm going to be doing a S15 SR20DET. Link to comment
Recommended Posts