kermit521 Posted January 25, 2010 Report Share Posted January 25, 2010 Hello All! I'm a newbie on here, but I've been lurking this forum for a while, and have always been able to find the answers I needed without posting anything, but I couldn't find anything on this... I just picked up a 72 521 project that I'm going to build into a Super low budget daily driver. Both of the triangle vent windows are broken out, but the seals and frames look to be in good shape. I picked up a set of complete 521 doors at the Desert Datsuns swap meet this weekend just for the vent windows. The seals in the new doors are trashed, so I was hoping to remove just the triangle window glass and maybe the chrome frame from from the new doors and put them in my old doors that are on the truck. I unscrewed all of the small philips heads from the top of the door, but the windows are still attacked somwhere at the bottom. Has anyone done this, or know of an easy way to get these things out? Thanks for any help :) Quote Link to comment
jefe de jefes Posted January 25, 2010 Report Share Posted January 25, 2010 Take the door panels off if they are still on. Look inside and there should be some bolts. Can't remember how many..... I had to replace my driver side vent window after someone tried stealing my truck. Quote Link to comment
yellowdatsun Posted January 25, 2010 Report Share Posted January 25, 2010 Should also be a couple small ones on the top of the window frame. Quote Link to comment
Pacific coast Datsun Posted January 25, 2010 Report Share Posted January 25, 2010 Jefe is right. There will be several "screws" holding the frame onto the door itself. Use some PB blaster or WD-40 & be patient. They tend to be tight & stubborn. On a side note i was selling @ the PHX swap too, did you own the black 521 ? Quote Link to comment
kermit521 Posted January 25, 2010 Author Report Share Posted January 25, 2010 Jefe is right. There will be several "screws" holding the frame onto the door itself. Use some PB blaster or WD-40 & be patient. They tend to be tight & stubborn. On a side note i was selling @ the PHX swap too, did you own the black 521 ? No, I didn't bring my Datsun, I was in a dark blue Scion xb with no hubcaps. I actually just bought the 521 last week, and got it running just yesterday. Fired right up after sitting for over five years from what the p/o told me. I got it for $300, and its pretty much all there, and totally rust free. The motor is burning a lot of oil though, so im on the lookout for a decent l16 long block right now. Quote Link to comment
dat521kid Posted January 26, 2010 Report Share Posted January 26, 2010 if the door glass is still on the regulator, you must first knock that off and then the glass will be lower in which case you would pull the vent window assembly over the glass and should come off Quote Link to comment
Madness Posted January 27, 2010 Report Share Posted January 27, 2010 There is a window bumper at the bottom of the rear window track, that has to come off then the window will go further into the door. I think there is 2 or 3 big #3 screws holding the front window track/ vent window frame in place plus the smaller ones you got to. After all the screws are out you kinda just have to gently pry and wiggle it out. Its really a bitch and removing glass really makes me on edge after shattering my perfect windshield for the 521. If you look around in the door with a flashlight for a while you should figure out how the window tracks and everything works. Good luck. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.