webber install ?

[sick620]

what do i do with this

[izzo]

It wont create a vacuum leak, you could just hook it up to the bottom of the air filter plate.

 

I leave mine open as a lot do, or you can just get a tiny little filter on there some people prefer that.

[ariascarlos1990]

You do NOT want to block it off. if anything put a mini air filter on it.

[sick620]

cool thanks

[sick620]

what is this for.... it came with my air filter ......how do i mount this?

[bonvo]

second pic is correct it connects to the nipple on the valve cover

 

as for the vacume line the one further forward goes to the vacume advance i blocked the other one off with a vacume cap

 

(follow the braided hose)

[sick620]

ok thanks thats what I thought.

[TrevDaddy]

I am about to jump into this as soon as my weber shows up. So the valve cover hose connects to the white connection under the filter support plate? That would be the closest to the stock setup.

[sick620]

i only have one vacuum line on my carb bonvo. its going to my vacuum advance

[sick620]

bonvo did you have a egr or did you cover it up?

[bonvo]

i only have one vacuum line on my carb bonvo. its going to my vacuum advance

 

then you have a different model :P but thats fine you have it right

 

bonvo did you have a egr or did you cover it up?

 

no i dont i have an early l16 intake manifold that has been ported to match the l20b u67 head ports